Software Events
Write bits in this register to create a software event on the corresponding event channels.

Bits 0-7 in the EVSYS.SWEVENTA register correspond to event channels 0-7. If the number of available event channels is between eight and 15, these are available in the EVSYS.SWEVENTB register, where bit n corresponds to event channel 8+n.

Refer to the Peripheral Overview section for the available number of Event System channels.

Name:
SWEVENTx
Offset:
0x00 + x*0x01 [x=0..1]
Reset:
0x00
Access:
-
 Bit7 6 5 4 3 2 1 0 SWEVENTx[7:0] AccessW W W W W W W W Reset0 0 0 0 0 0 0 0

## Bits 7:0 – SWEVENTx: Software Event Channel Select

Software Event Channel Select

Writing a bit in this bit group to ‘1’ will generate a single-pulse event on the corresponding event channel by inverting the signal on the event channel for one peripheral clock cycle.