2018 - June 25th (ver 1.3)

Parent topic: Change Log

START Configurator

Features

  • (#10902) Added ARM TrustZone support for Atmel Studio projects
  • (#11341) Added support for exporting MPLAB X projects
  • (#11228) Added descriptive dialog and notes on obsolete devices
  • (#2750) Added information on how to add RTOS if RTOS version of drivers are selected
  • (#11338) Activated color in Pinmux view when pin is configured
  • (#10982) Changed default clock from 8 mhz to 16 mhz for Mega324BP Explain Pro board
  • QTouch device support is added for SAML10 and SAML11 device family
  • QTouch support is extended for the following device variants
    • ATSAMD20E16B, ATSAMD20E15B, ATSAMD20E14B
    • ATSAMD20G16B, ATSAMD20G15B, ATSAMD20G14B
    • ATSAMD20J16B, ATSAMD20J15B, ATSAMD20J14B
    • SAMHA1E14AB, SAMHA1E15AB, SAMHA1E16AB

Improvements

  • QTouch Configurator Sub-tabs for Pins and Parameters tabs.
  • Sync parameter values in the channel with enable and disable option.
  • Sensor creation count status message.
  • Notifications for SamL1x GCC support, L11 Trust Zone and AKS setting.
  • Timeout issue fix for table tooltips in parameters tab.
  • Tooltips for slider/wheel configuration table.
  • Scroller parameters table field type change, sensor resolution and sensor deadband to enums.
  • Surface utility and DV direct download links.

Bug Fixes

  • Ensured frequencies are recalculated when changing clock options

Know issues

  • Pre-configured clock system support does not work for SAME5x, D51 family touch projects
  • IAR compiler for SAM L10 and SAM L11 family is not supported

UI Changes

  • If an RTOS version of a driver is selected, a button to access more information is added. From this, RTOS can be added to the project.

START Content

New devices

  • ATSAML10D14A, ATSAML10D15A, ATSAML10D16A
  • ATSAML10E14A, ATSAML10E15A, ATSAML10E16A
  • ATSAML11D14A, ATSAML11D15A, ATSAML11D16A
  • ATSAML11E14A, ATSAML11E15A, ATSAML11E16A

New middleware

  • Added LwIP-v2.0.3 stack
  • Added TrustZone Manager

New boards

  • SAML10-XPRO
  • SAML11-XPRO

New examples

  • Added example to demonstrate OPAMP as a ADC gain Amplifier for SAML10-XPRO
  • Added three example to demonstrate CPU performance with and without DMA along with ADC and USART for SAML10-XPRO
  • Added TCC example to generate complementary waveform using TCC advance features for SAME54-XPRO
  • Added example which uses the DMA Sequencing Operation supported by the ADC on SAM E54
  • SAML11 Xplained Pro Self capacitance Shield Water Tolerant Secure Touch Example with QT7 extension
  • SAML11 Xplained Pro Mutual capacitance Secure Touch Example with QT3 keypad extension
  • SAML11 secure project with Trustzone middleware that should be used in association with non-secure touch example project
  • SAML10 Xplained Pro Mutual capacitance Touch Example with QT3 keypad extension
  • SAML10 Xplained Pro Self capacitance Shield Water Tolerant Touch Example with QT7 extension

Improvements

  • Application code update for frequency hop module done for enhanced frequency hopping support.
  • SCROLLER resolution and deadband parameters are modified to have enum values.
  • CC values formula is corrected for the devices with four phase selfcap technology – SAML1x, SAME5x and SAMD51.
  • Pre-scaler description for the nodes is corrected.
  • Adjust QSPI parameter, increase speed and add bulk read/write test for XIP demo

Bug fixes

  • Remove reserved ADC Negative Mux Input "I/O ground" option for SAML21/L22/R30/D51/E51/E53/E54
  • Fix QSPI Flash erasing sequence

Know issues

  • TrustZone support for "µVision from Keil" and "IAR Embedded Workbench" is not available for START projects now and it will be added soon