10.1 Messages 0 Thru 499

(1) too many errors (*) (all applications)

The executing compiler application has encountered too many errors and will exit immediately. Other uncompiled source files will be processed, but the compiler applications that would normally be executed in due course will not be run. The number of errors that can be accepted is controlled using the -fmax-errors option.

(2) error/warning (*) generated but no description available (all applications)

The executing compiler application has emitted a message (advisory/warning/error), but there is no description available in the message description file (MDF) to print. This could be because the MDF is out-of-date, or the message issue has not been translated into the selected language.

(3) malformed error information on line * in file * (all applications)

The compiler has attempted to load the messages for the selected language, but the message description file (MDF) was corrupted and could not be read correctly.

(100) unterminated #if[n][def] block from line * (Preprocessor)

#if INPUT        /* error flagged here */
int main(void)
{
    run();
}                /* no #endif was found in this module */

(101) #* cannot follow #else (Preprocessor)

#ifdef FOO
    result = foo;
#else
    result = bar;
#elif defined(NEXT)   /* the #else above terminated the #if */
    result = next(0);
#endif

(102) #* must be in an #if (Preprocessor)

#ifdef FOO
    result = foo;
#endif
    result = bar;
#elif defined(NEXT)   /* the #endif above terminated the #if */
    result = next(0);
#endif

(103) #error: * (Preprocessor)

This is a programmer generated error; there is a directive causing a deliberate error. This is normally used to check compile time defines, etc. Remove the directive to remove the error, but first determine why the directive is there.

(104) preprocessor #assert failure (Preprocessor)

#assert SIZE == 4  /* size should never be 4 */

(105) no #asm before #endasm (Preprocessor)

void cleardog(void)
{
    clrwdt
    #endasm  /* in-line assembler ends here, only where did it begin? */
}

(106) nested #asm directives (Preprocessor)

#asm
    MOVE  r0, #0aah
#asm      ; previous #asm must be closed before opening another
    SLEEP
#endasm

(107) illegal # directive “*” (Preprocessor, Parser)

#indef DEBUG  /* oops -- that should be #undef DEBUG */

(108) #if[n][def] without an argument (Preprocessor)

#if            /* oops -- no argument to check */
output = 10;
#else
output = 20;
#endif

(109) #include syntax error (Preprocessor)

#include stdio.h  /* oops -- should be: #include <stdio.h> */

(110) too many file arguments; usage: cpp [input [output]] (Preprocessor)

CPP should be invoked with at most two file arguments. Contact Microchip Technical Support if the preprocessor is being executed by a compiler driver.

(111) redefining preprocessor macro “*” (Preprocessor)

#define ONE 1
/* elsewhere: */
/* Is this correct? It will overwrite the first definition. */
#define ONE one

(112) #define syntax error (Preprocessor)

#define FOO(a, 2b)  bar(a, 2b)  /* 2b is not to be! */

(113) unterminated string in preprocessor macro body (Preprocessor, Assembler)

A macro definition contains a string that lacks a closing quote.

(114) illegal #undef argument (Preprocessor)

#undef 6YYY  /* this isn’t a valid symbol name */

(115) recursive preprocessor macro definition of “*” defined by “*” (Preprocessor)

The named macro has been defined in such a manner that expanding it causes a recursive expansion of itself.

(116) end of file within preprocessor macro argument from line * (Preprocessor)

#define FUNC(a, b) func(a+b)
FUNC(5, 6;    /* oops -- where is the closing bracket? */

(117) misplaced constant in #if (Preprocessor)

#if FOO BAR  /* oops -- did you mean: #if FOO == BAR ? */

(118) stack overflow processing #if expression (Preprocessor)

The preprocessor filled up its expression evaluation stack in a #if expression. Simplify the expression – it probably contains too many parenthesized subexpressions.

(119) invalid expression in #if line (Preprocessor)

This is an internal compiler error. Contact Microchip Technical Support with details.

(120) operator “*” in incorrect context (Preprocessor)

#if FOO * % BAR == 4  /* what is "* %" ? */
#define BIG
#endif

(121) expression stack overflow at operator “*” (Preprocessor)

Expressions in #if lines are evaluated using a stack with a size of 128. It is possible for very complex expressions to overflow this. Simplify the expression.

(122) unbalanced parenthesis at operator “*” (Preprocessor)

#if ((A) + (B)  /* oops -- a missing ), I think */
#define ADDED
#endif

(123) misplaced “?” or “:”; previous operator is “*” (Preprocessor)

#if XXX : YYY  /* did you mean:  #if COND ? XXX : YYY */

(124) illegal character “*” in #if (Preprocessor)

#if YYY  /* what are these characters doing here? */
int m;
#endif

(125) illegal character (* decimal) in #if (Preprocessor)

#if ^S YYY  /* what is this control characters doing here? */
int m;
#endif

(126) strings can’t be used in #if (Preprocessor)

/* no string operations allowed by the preprocessor */
#if MESSAGE > "hello"
#define DEBUG
#endif

(127) bad syntax for defined() in #[el]if (Preprocessor)

/* oops -- defined expects a name, not an expression */
#if defined(a&b)
input = read();
#endif

(128) illegal operator in #if (Preprocessor)

#if FOO = 6  /* oops -- should that be: #if FOO == 5 ? */

(129) unexpected “\” in #if (Preprocessor)

#if FOO == \34
#define BIG
#endif

(130) unknown type “*” in #[el]if sizeof() (Preprocessor)

#if sizeof(unt) == 2  /* should be: #if sizeof(int) == 2 */
i = 0xFFFF;
#endif

(131) illegal type combination in #[el]if sizeof() (Preprocessor)

/* To sign, or not to sign, that is the error. */
#if sizeof(signed unsigned int) == 2
i = 0xFFFF;
#endif

(132) no type specified in #[el]if sizeof() (Preprocessor)

#if sizeof()  /* oops -- size of what? */
i = 0;
#endif

(133) unknown type code (0x*) in #[el]if sizeof() (Preprocessor)

The preprocessor has made an internal error in evaluating a sizeof() expression. Check for a malformed type specifier. This is an internal error. Contact Microchip Technical Support with details.

(134) syntax error in #[el]if sizeof() (Preprocessor)

#if sizeof(int == 2)  // oops - should be: #if sizeof(int) == 2
i = 0xFFFF;
#endif

(135) unknown operator (*) in #if (Preprocessor)

The preprocessor has tried to evaluate an expression with an operator it does not understand. This is an internal error. Contact Microchip Technical Support with details.

(137) strange character “*” after ## (Preprocessor)

/* the ’ character will not lead to a valid token */
#define cc(a, b) a ## ’b

(138) strange character (*) after ## (Preprocessor)

/* the ’ character will not lead to a valid token */
#define cc(a, b) a ## ’b

(139) end of file in comment (Preprocessor)

/* Here the comment begins. I’m not sure where I end, though
}

(140) can’t open * file “*”: * (Driver, Preprocessor, Code Generator, Assembler)

xc8 @communds

should that be:

xc8 @commands

(141) can’t open * file “*”: * (Any)

An output file could not be created. Confirm the spelling and path of the file specified on the command line.

(144) too many nested #if blocks (Preprocessor)

#if, #ifdef, etc., blocks can only be nested to a maximum of 32.

(146) #include filename too long (Preprocessor)

A filename constructed while looking for an include file has exceeded the length of an internal buffer. Because this buffer is 4096 bytes long, this is unlikely to happen.

(147) too many #include directories specified (Preprocessor)

A maximum of 7 directories can be specified for the preprocessor to search for include files. The number of directories specified with the driver is too many.

(148) too many arguments for preprocessor macro (Preprocessor)

A macro can only have up to 31 parameters, per the C Standard.

(149) preprocessor macro work area overflow (Preprocessor)

The total length of a macro expansion has exceeded the size of an internal table. This table is normally 32768 bytes long. Thus any macro expansion must not expand to a total of more than 32K bytes.

(150) illegal “__” preprocessor macro “*” (Preprocessor)

This is an internal compiler error. Contact Microchip Technical Support with details.

(151) too many arguments in preprocessor macro expansion (Preprocessor)

There were too many arguments supplied in a macro invocation. The maximum number allowed is 31.

(152) bad dp/nargs in openpar(): c = * (Preprocessor)

This is an internal compiler error. Contact Microchip Technical Support with details.

(153) out of space in preprocessor macro * argument expansion (Preprocessor)

A macro argument has exceeded the length of an internal buffer. This buffer is normally 4096 bytes long.

(155) work buffer overflow concatenating “*” (Preprocessor)

This is an internal compiler error. Contact Microchip Technical Support with details.

(156) work buffer “*” overflow (Preprocessor)

This is an internal compiler error. Contact Microchip Technical Support with details.

(157) can’t allocate * bytes of memory (Code Generator, Assembler)

This is an internal compiler error. Contact Microchip Technical Support with details.

(158) invalid disable in preprocessor macro “*” (Preprocessor)

This is an internal compiler error. Contact Microchip Technical Support with details.

(159) too many calls to unget() (Preprocessor)

This is an internal compiler error. Contact Microchip Technical Support with details.

(161) control line “*” within preprocessor macro expansion
 (Preprocessor)

A preprocessor control line (one starting with a #) has been encountered while expanding a macro. This should not happen.

(162) #warning: * (Preprocessor, Driver)

This warning is either the result of user-defined #warning preprocessor directive, or the driver encountered a problem reading the map file. If the latter, contact Microchip Technical Support with details

(163) unexpected text in control line ignored (Preprocessor)

#if defined(END)
#define NEXT
#endif END     /* END would be better in a comment here */

(164) #include filename “*” was converted to lower case (Preprocessor)

#include <STDIO.H>  /* oops -- should be: #include <stdio.h> */

(165) #include filename “*” does not match actual name (check upper/lower case)
 (Preprocessor)

In Windows versions this means the file to be included actually exists and is spelled the same way as the #include filename; however, the case of each does not exactly match. For example, specifying #include “code.c” will include Code.c, if it is found. In Linux versions this warning could occur if the file wasn’t found.

(166) too few values specified with option “*” (Preprocessor)

The list of values to the preprocessor (CPP) -S option is incomplete. This should not happen if the preprocessor is being invoked by the compiler driver. The values passed to this option represent the sizes of char, short, int, long, float and double types.

(167) too many values specified with -S option; “*” unused Preprocessor)

There were too many values supplied to the -S preprocessor option. See message 166.

(168) unknown option “*” (Any)

The option given to the component which caused the error is not recognized.

(169) strange character (*) after ## (Preprocessor)

There is an unexpected character after #.

(170) symbol “*” in undef was never defined (Preprocessor)

#ifdef SYM
#undef SYM  /* only undefine if defined */
#endif

(171) wrong number of preprocessor macro arguments for “*” (* instead of *) 
 (Preprocessor)

#define ADD(a, b) (a+b)
ADD(1, 2, 3)        /* oops -- only two arguments required */

(172) formal parameter expected after # (Preprocessor)

#define str(x) #y  /* oops -- did you mean x instead of y? */

If you need to stringize a token, you will need to define a special macro to do it, for example:

#define __mkstr__(x) #x

then use __mkstr__(token) wherever you need to convert token into a string.

(173) undefined symbol “*” in #if; 0 used (Preprocessor)

#if FOO+BAR    /* e.g. FOO was never #defined */
#define GOOD
#endif

(174) multi-byte constant “*” isn’t portable (Preprocessor)

#if CHAR == ’ab’
#define MULTI
#endif

(175) division by zero in #if; zero result assumed (Preprocessor)

#if foo/0  /* divide by 0: was this what you were intending? */
int a;
#endif

(176) missing newline (Preprocessor)

A new line is missing at the end of the line. Each line, including the last line, must have a new line at the end. This problem is normally introduced by editors.

(177) symbol “*” in -U option was never defined (Preprocessor)

A macro name specified in a -U option to the preprocessor was not initially defined, and thus cannot be undefined.

(179) nested comments (Preprocessor)

output = 0;  /* a comment that was left unterminated
flag = TRUE; /* next comment:
hey, where did this line go? */

(180) unterminated comment in included file (Preprocessor)

Comments begun inside an included file must end inside the included file.

(181) non-scalar types can’t be converted to other types (Parser)

struct TEST test;
struct TEST * sp;
sp = test;       /* oops -- did you mean: sp = &test; ? */

(182) illegal conversion between types (Parser)

struct LAYOUT layout;
int i;
layout = i;          /* int cannot be converted to struct */

Note that even if a structure only contains an int , for example, it cannot be assigned to an int variable and vice versa.

(183) function or function pointer required (Parser)

int a, b, c, d;
a = b(c+d);   /* b is not a function -- did you mean a = b*(c+d) ? */

(184) calling an interrupt function is illegal (Parser)

A function-qualified interrupt cannot be called from other functions. It can only be called by a hardware (or software) interrupt. This is because an interrupt function has special function entry and exit code that is appropriate only for calling from an interrupt. An interrupt function can call other non-interrupt functions.

(185) function does not take arguments (Parser, Code Generator)

int get_value(void);
int main(void)
{
int input;
input = get_value(6);  /* oops --
parameter should not be here */
}

(186) too many function arguments (Parser)

void add(int a, int b);
add(5, 7, input);      /* call has too many arguments */

(187) too few function arguments (Parser)

void add(int a, int b);
add(5);                  /* this call needs more arguments */

(188) constant expression required (Parser)

int a;
switch(input) {
case a:  /* oops!
cannot use variable as part of a case label */
input++;
}

(189) illegal type for array dimension (Parser)

int array[12.5];  /* oops -- twelve and a half elements, eh? */

(190) illegal type for index expression (Parser)

int i, array[10];
i = array[3.5];   /* oops --
exactly which element do you mean? */

(191) cast type must be scalar or void (Parser)

lip = (long [])input;  /* oops -- possibly: lip = (long *)input */

(192) undefined identifier “*” (Parser)

This symbol has been used in the program, but has not been defined or declared. Check for spelling errors if you think it has been defined.

(193) not a variable identifier “*” (Parser)

This identifier is not a variable; it can be some other kind of object, i.e., a label.

(194) “)” expected (Parser)

if(a == b  /* the closing parenthesis is missing here */
b = 0;   /* the error is flagged here */

(195) expression syntax (Parser)

a /=% b;  /* oops -- possibly that should be: a /= b; */

(196) struct/union required (Parser)

int a;
a.b = 9;  /* oops -- a is not a structure */

(197) struct/union member expected (Parser)

A structure or union member name must follow a dot “.” or an arrow (“->”).

(198) undefined struct/union “*” (Parser)

struct WHAT what;  /* a definition for WHAT was never seen */

(199) logical type required (Parser)

struct FORMAT format;
if(format)            /* this operand must be a scaler type */
    format.a = 0;

(200) taking the address of a register variable is illegal (Parser)

int * proc(register int in)
{
    int * ip = ∈
    /* oops -- in cannot have an address to take */
    return ip;
}

(201) taking the address of this object is illegal (Parser)

ip = &8;  /* oops -- you cannot take the address of a literal */

(202) only lvalues can be assigned to or modified (Parser)

int array[10];
int * ip;
char c;
array = ip;   /* array is not a variable, it cannot be written to */

A typecast does not yield an lvalue, for example:

/* the contents of c cast to int is only a intermediate value */
(int)c = 1;

However, you can write this using pointers:

*(int *)&c = 1

(203) illegal operation on bit variable (Parser)

bit   b;
int * ip;
ip = &b;  /* oops -- cannot take the address of a bit object */

(204) void function can’t return a value (Parser)

void run(void)
{
    step();
    return 1;  /* either run should not be void, or remove the 1 */
}

(205) integral type required (Parser)

This operator requires operands that are of integral type only.

(206) illegal use of void expression (Parser)

A void expression has no value and therefore you cannot use it anywhere an expression with a value is required, i.e., as an operand to an arithmetic operator.

(207) simple type required for “*” (Parser)

A simple type (i.e., not an array or structure) is required as an operand to this operator.

(208) operands of “*” not same type (Parser)

int * ip;
char * cp, * cp2;
cp = flag ? ip : cp2;  /* result of ? : will be int * or char * */

Possibly, you meant something like:

cp = flag ? (char *)ip : cp2;

(209) type conflict (Parser)

The operands of this operator are of incompatible types.

(210) bad size list (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(211) taking sizeof bit is illegal (Parser)

It is illegal to use the sizeof() operator with the C __bit type. When used against a type, the sizeof() operator gives the number of bytes required to store an object that type. Therefore its usage with the __bit type make no sense and it is an illegal operation.

(212) missing number after pragma “pack” (Parser)

#pragma pack  /* what is the alignment value */

Possibly, you meant something like:

#pragma pack 2

(214) missing number after pragma “interrupt_level” (Parser)

The pragma interrupt_level requires an argument to indicate the interrupt level. It will be the value 1 for mid-range devices, or 1 or 2 or PIC18 devices.

(215) missing argument to pragma “switch” (Parser)

#pragma switch  /* oops -- this requires a switch mode */

Possibly, you meant something like:

#pragma switch simple

(216) missing argument to pragma “psect” (Parser)

#pragma psect  /* oops -- this requires an psect to redirect */

Possibly, you meant something like:

#pragma psect text=specialtext

(218) missing name after pragma “inline” (Parser)

#pragma inline  /* what is the function name? */

Possibly, you meant something like:

#pragma inline memcpy

(219) missing name after pragma “printf_check” (Parser)

#pragma printf_check  /* what function is to be checked? */

Possibly, you meant something like:

#pragma printf_check sprintf

Pragmas for all the standard printf-like function are already contained in <stdio.h>.

(220) exponent expected (Parser)

float f;
f = 1.234e;  /* oops -- what is the exponent? */

(221) hexadecimal digit expected (Parser)

a = 0xg6;  /* oops -- was that meant to be a = 0xf6 ? */

(222) binary digit expected (Parser)

i = 0bf000;  /* oops -- f000 is not a base two value */

(223) digit out of range (Parser, Assembler)

int a = 058; /* leading 0 implies octal which has digits 0 - 7 */

(224) illegal “#” directive (Parser)

An illegal # preprocessor has been detected. Likely, a directive has been misspelled in your code somewhere.

(225) missing character in character constant (Parser)

char c = ";  /* the character value of what? */

(226) char const too long (Parser)

c = ’12’;  /* oops -- only one character can be specified */

(227) “.” expected after “..” (Parser)

The only context in which two successive dots can appear is as part of the ellipsis symbol, which must have 3 dots (an ellipsis is used in function prototypes to indicate a variable number of parameters).

Either .. was meant to be an ellipsis symbol which would require you to add an extra dot, or it was meant to be a structure member operator which would require you to remove one dot.

(228) illegal character (*) (Parser)

c = a;  /* oops -- did you mean c = ’a’; ? */

(229) unknown qualifier “*” given to -A (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(230) missing argument to -A (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(231) unknown qualifier “*” given to -I (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(232) missing argument to -I (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(233) bad -Q option “*” (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(234) close error (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(236) simple integer expression required (Parser)

int address;
char LOCK __at(address);

(237) function “*” redefined (Parser)

int twice(int a)
{
    return a*2;
}
/* only one prototype & definition of rv can exist */
long twice(long a)
{
    return a*2;
}

(238) illegal initialization (Parser)

/* oops -- uint is a type, not a variable */
typedef unsigned int uint = 99;

(239) identifier “*” redefined (from line *) (Parser)

int a;  /* a filescope variable called "a" */
int a;  /* attempting to define another of the same name */

Note that variables with the same name, but defined with different scopes, are legal; but; not recommended.

(240) too many initializers (Parser)

/* three elements, but four initializers */
int ivals[3] = { 2, 4, 6, 8};

(241) initialization syntax (Parser)

int iarray[10] = {{’a’, ’b’, ’c’};
/* oops -- one two many {s */

(242) illegal type for switch expression (Parser)

double d;
switch(d) {  /* oops -- this must be integral */
case ’1.0’:
    d = 0;
}

(243) inappropriate break/continue (Parser)

switch(input) {
case 0:
    if(output == 0)
        input = 0xff;
    } /* oops! this should not be here; it closed the switch */
    break;     /* this should be inside the switch */

(244) “default” case redefined (Parser)

switch(a) {
default:     /* if this is the default case... */
    b = 9;
    break;
default:     /* then what is this? */
    b = 10;
    break;

(245) “default” case not in switch (Parser)

A label has been encountered called default, but it is not enclosed by a switch statement. A default label is only legal inside the body of a switch statement.

If there is a switch statement before this default label, there could be one too many closing braces in the switch code. That would prematurely terminate the switch statement. See message 246.

(246) case label not in switch (Parser)

A case label has been encountered, but there is no enclosing switch statement. A case label can only appear inside the body of a switch statement.

If there is a switch statement before this case label, there might be one too many closing braces in the switch code. That would prematurely terminate the switch statement, for example:

switch(input) {
case ’0’:
    count++;
    break;
case ’1’:
    if(count>MAX)
        count= 0;
    }          /* oops -- this shouldn’t be here */
    break;
case ’2’:    /* error flagged here */

(247) duplicate label “*” (Parser)

start:
if(a > 256)
    goto end;
start:           /* error flagged here */
if(a == 0)
    goto start;  /* which start label do I jump to? */

(248) inappropriate “else” (Parser)

/* here is a comment which I have forgotten to close...
if(a > b) {
    c = 0;
/* ... that will be closed here, thus removing the "if" */
else        /* my "if" has been lost */
    c = 0xff;

(249) probable missing “}” in previous block (Parser)

void set(char a)
{
    PORTA = a;
    /* the closing brace was left out here */
void clear(void)  /* error flagged here */
{
    PORTA = 0;
}

(251) array dimension redeclared (Parser)

extern int array[5];
int array[10];        /* oops -- has it 5 or 10 elements? */

(252) argument * conflicts with prototype (Parser)

/* this is supposedly calc’s prototype */
extern int calc(int, int);
int calc(int a, long int b)  /* hmmm -- which is right? */
{                            /* error flagged here */
    return sin(b/a);
}

(253) argument list conflicts with prototype (Parser)

extern int calc(int);   /* this is supposedly calc’s prototype */
int calc(int a, int b)  /* hmmm -- which is right? */
{                       /* error flagged here */
    return a + b;
}

(254) undefined *: “*” (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(255) not a member of the struct/union “*” (Parser)

struct {
    int a, b, c;
} data;
if(data.d)    /* oops -- there is no member d in this structure */
    return;

(256) too much indirection (Parser)

A pointer declaration can only have 16 levels of indirection.

(257) only “register” storage class allowed (Parser)

void process(static int input)

(258) duplicate qualifier (Parser)

typedef volatile int vint;
/* oops -- this results in two volatile qualifiers */
volatile vint very_vol;

(259) object can’t be qualified both far and near (Parser)

far near int spooky;  /* oops -- choose far or near, not both */

(260) undefined enum tag “*” (Parser)

enum WHAT what;  /* a definition for WHAT was never seen */

(261) struct/union member “*” redefined (Parser)

struct {
    int a;
    int b;
    int a;  /* oops -- a different name is required here */
} input;

(262) struct/union “*” redefined (Parser)

struct {
    int a;
} ms;
struct {
    int a;
} ms;    /* was this meant to be the same name as above? */

(263) members can’t be functions (Parser)

struct {
    int a;
    int get(int);  /* should be a pointer: int (*get)(int); */
} object;

(264) bad bitfield type (Parser)

struct FREG {
    char b0:1;   /* these must be part of an int, not char */
    char   :6;
    char b7:1;
} freg;

(265) integer constant expected (Parser)

struct {
    unsigned first:  /* oops -- should be: unsigned first; */
    unsigned second;
} my_struct;

If this was meant to be a structure with bit-fields, then the following illustrates an example:

struct {
    unsigned first : 4;  /* 4 bits wide */
    unsigned second: 4;  /* another 4 bits */
} my_struct;

(266) storage class illegal (Parser)

struct {
    /* no additional qualifiers can be present with members */
    static int first;
} ;

(267) bad storage class (Code Generator)

auto int foo; /* auto not permitted with global variables */
int power(static int a)  /* parameters cannot be static */
{
    return foo * a;
}

(268) inconsistent storage class (Parser)

extern static int where;  /* so is it static or extern? */

(269) inconsistent type (Parser)

int float input;  /* is it int or float? */

(270) variable can’t have storage class “register” (Parser)

register int gi;      /* this cannot be qualified register */
int process(register int input)  /* this is okay */
{
    return input + gi;
}

(271) type can’t be long (Parser)

long char lc;  /* what? */

(272) type can’t be short (Parser)

short float sf;  /* what? */

(273) type can’t be both signed and unsigned (Parser)

signed unsigned int confused;  /* which is it? */

(274) type can’t be unsigned (Parser)

unsigned float uf;  /* what? */

(275) “...” illegal in non-prototype argument list (Parser)

/* K&R-style non-prototyped function definition */
int kandr(a, b, ...)
    int a, b;
{

(276) type specifier required for prototyped argument (Parser)

A type specifier is required for a prototyped argument. It is not acceptable to just have an identifier.

(277) can’t mix prototyped and non-prototyped arguments (Parser)

int plus(int a, b)  /* oops -- a is prototyped, b is not */
int b;
{
    return a + b;
}

(278) argument “*” redeclared (Parser)

/* cannot have two parameters called "a" */
int calc(int a, int a)

(279) initialization of function arguments is illegal (Parser)

/* oops -- a is initialized when proc is called */
extern int proc(int a = 9);

(280) arrays of functions are illegal (Parser)

int * farray[]();  /* oops -- should be: int (* farray[])(); */

(281) functions can’t return functions (Parser)

A function cannot return a function. It can return a function pointer. A function returning a pointer to a function could be declared like this: int (* (name()))(). Note the many parentheses that are necessary to make the parts of the declaration bind correctly.

(282) functions can’t return arrays (Parser)

A function can return only a scalar (simple) type or a structure. It cannot return an array.

(283) dimension required (Parser)

/* This should be, for example: int arr[][7] */
int get_element(int arr[2][])
{
    return array[1][6];
}

(284) invalid dimension (Parser)

int array[0];  // oops -- you cannot have an array of size 0

(285) no identifier in declaration (Parser)

void interrupt(void)  /* what is the name of this function? */
{
}

(286) declarator too complex (Parser)

This declarator is too complex for the compiler to handle. Examine the declaration and find a way to simplify it. If the compiler finds it too complex, so will anybody maintaining the code.

(287) arrays of bits or pointers to bit are illegal (Parser)

bit barray[10];  /* wrong -- no bit arrays */
bit * bp;        /* wrong -- no pointers to bit variables */

(288) the type 'void' is applicable only to functions (Parser)

int a;
void b;  /* this makes no sense */

(289) the specifier 'interrupt' is applicable only to functions (Parser)

/* variables cannot be qualified interrupt */
interrupt int input;

(290) illegal function qualifier(s) (Parser)

const char ccrv(void) /* const * char ccrv(void) perhaps? */
{                     /* error flagged here */
    return ccip;
}

(291) K&R identifier “*” not an argument (Parser)

int process(input)
int unput;        /* oops -- that should be int input; */
{
}

(292) a function is not a valid parameter type (Parser)

A function parameter cannot be a function. It can be a pointer to a function, so perhaps a * has been omitted from the declaration.

(293) bad size in index_type() (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(294) can’t allocate * bytes of memory (Code Generator, Hexmate)

This is an internal compiler error. Contact Microchip Technical Support with details.

(295) expression too complex (Parser)

This expression has caused overflow of the compiler’s internal stack and should be rearranged or split into two expressions.

(296) out of memory (Objtohex)

This could be an internal compiler error. Contact Microchip Technical Support with details.

(297) bad argument (*) to tysize() (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(298) end of file in #asm (Preprocessor)

#asm
MOV  r0, #55
MOV  [r1], r0
}                /* oops -- where is the #endasm */

(300) unexpected end of file (Parser)

int main(void)
{
    init();
    run();    /* is that it? What about the close brace */

(301) end of file on string file (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(302) can’t reopen “*”: * (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(303) can’t allocate * bytes of memory (line *) (Parser)

The parser was unable to allocate memory for the longest string encountered, as it attempts to sort and merge strings. Try reducing the number or length of strings in this module.

(306) can’t allocate * bytes of memory for * (Code Generator)

This is an internal compiler error. Contact Microchip Technical Support with details.

(307) too many qualifier names (Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(308) too many case labels in switch (Code Generator)

There are too many case labels in this switch statement. The maximum allowable number of case labels in any one switch statement is 511.

(309) too many symbols (Assembler, Parser)

There are too many symbols for the assembler’s symbol table. Reduce the number of symbols in your program.

(310) “]” expected (Parser)

process(carray[idx);  /* oops --
should be: process(carray[idx]); */

(311) closing quote expected (Parser)

A closing quote was expected for the indicated string.

(312) “*” expected (Parser)

The indicated token was expected by the parser.

(313) function body expected (Parser)

/* the function block must follow, not a semicolon */
int get_value(a, b);

(314) “;” expected (Parser)

while(a) {
    b = a--  /* oops -- where is the semicolon? */
}          /* error is flagged here */

Note: Omitting a semicolon from statements not preceding a close brace or keyword typically results in some other error being issued for the following code which the parser assumes to be part of the original statement.

(315) “{” expected (Parser)

/* oops! no opening brace after the prototype */
void process(char c)
    return max(c, 10) * 2; /* error flagged here */
}

(316) “}” expected (Parser)

char carray[4] = { 1, 2, 3, 4;  /* oops -- no closing brace */

(317) “(” expected (Parser)

if a == b  /* should be: if(a == b) */
b = 0;

(318) string expected (Parser)

asm(nop);  /* that should be asm("nop");

(319) while expected (Parser)

do {
    func(i++);
}             /* do the block while what condition is true? */
if(i > 5)     /* error flagged here */
    end();

(320) “:” expected (Parser)

switch(input) {
case 0;         /* oops -- that should have been: case 0: */
    state = NEW;

(321) label identifier expected (Parser)

if(a)
    goto 20;
    /* this is not BASIC -- a valid C label must follow a goto */

(322) enum tag or “{” expected (Parser)

enum 1, 2;  /* should be, for example: enum {one=1, two }; */

(323) struct/union tag or “{” expected (Parser)

struct int a;  /* this is not how you define a structure */

You might mean something like:

struct {
    int a;
} my_struct;

(324) too many arguments for printf-style format string (Parser)

/* oops -- missed a placeholder? */
printf("%d - %d", low, high, median);

(325) error in printf-style format string (Parser)

printf("%l", lll);  /* oops -- possibly: printf("%ld", lll); */

(326) long int argument required in printf-style format string (Parser)

printf("%lx", 2);  // possibly you meant: printf("%lx", 2L);

(327) long long int argument required in printf-style format string (Parser)

printf("%llx", 2);  // possibly you meant: printf("%llx", 2LL);

(328) int argument required in printf-style format string (Parser)

printf("%d", 1.23); /* wrong number or wrong placeholder */

(329) double argument required in printf-style format string (Parser)

printf("%f", 44);  /* should be: printf("%f", 44.0); */

(330) pointer to * argument required in printf-style format string (Parser)

A pointer argument is required for this format specifier. Check the number and order of format specifiers and corresponding arguments.

(331) too few arguments for printf-style format string (Parser)

printf("%d - %d", low); /* oops! where is the other value to print? */

(332) “interrupt_level” should be 0 to 7 (Parser)

#pragma interrupt_level  9 /* oops -- the level is too high */
void interrupt isr(void)
{
    /* isr code goes here */
}

(333) unrecognized qualifier name after “strings” (Parser)

/* oops -- should that be #pragma strings const ? */
#pragma strings cinst

(334) unrecognized qualifier name after “printf_check” (Parser)

/* oops -- should that be const not cinst? */
#pragma printf_check(printf) cinst

(335) unknown pragma “*” (Parser)

#pragma rugsused myFunc w  /* I think you meant regsused */

(336) string concatenation across lines (Parser)

char * cp = "hi"
"there";    /* this is okay, but is it what you had intended? */

(337) line does not have a newline on the end (Parser)

The last line in the file is missing the newline (operating system dependent character) from the end. Some editors will create such files, which can cause problems for include files. The C standard requires all source files to consist of complete lines only.

(338) can’t create * file “*” (Any)

The application tried to create or open the named file, but it could not be created. Check that all file path names are correct.

(339) initializer in extern declaration (Parser)

extern int other = 99;  /* if it’s extern and not allocated
storage, how can it be initialized? */

(340) string not terminated by null character (Parser)

char foo[5] = "12345"; /* the string stored in foo won’t have
a null terminating, i.e.
foo = [’1’, ’2’, ’3’, ’4’, ’5’] */

(343) implicit return at end of non-void function (Parser)

int mydiv(double a, int b)
{
    if(b != 0)
        return a/b;   /* what about when b is 0? */
}                 /* warning flagged here */

(344) non-void function returns no value (Parser)

int get_value(void)
{
    if(flag)
        return val++;
    return;
    /* what is the return value in this instance? */
}

(345) unreachable code (Parser)

while(1)          /* how does this loop finish? */
    process();
flag = FINISHED;  /* how do we get here? */

(346) declaration of “*” hides outer declaration (Parser)

int input;         /* input has filescope */
void process(int a)
{
    int input;       /* local blockscope input */
    a = input;       /* this will use the local variable. Is this right? */

(347) external declaration inside function (Parser)

int process(int a)
{
    /* this would be better outside the function */
    extern int away;
    return away + a;
}

(348) auto variable “*” should not be qualified (Parser)

An auto variable should not have qualifiers such as near or far associated with it. Its storage class is implicitly defined by the stack organization. An auto variable can be qualified with static, but it is then no longer auto.

(349) non-prototyped function declaration for “*” (Parser)

int process(input)
int input;         /* warning flagged here */
{
}

This would be better written:

int process(int input)
{
}

(350) unused * “*” (from line *) (Parser)

The indicated object was never used in the function or module being compiled. Either this object is redundant, or the code that was meant to use it was excluded from compilation or misspelled the name of the object. Note that the symbols rcsid and sccsid are never reported as being unused.

(352) float parameter coerced to double (Parser)

double inc_flt(f)  /* f will be converted to double */
float f;           /* warning flagged here */
{
    return f * 2;
}

(353) sizeof external array “*” is zero (Parser)

The size of an external array evaluates to zero. This is probably due to the array not having an explicit dimension in the extern declaration.

(354) possible pointer truncation (Parser)

A pointer qualified far has been assigned to a default pointer, or a pointer qualified near, or a default pointer has been assigned to a pointer qualified near. This can result in truncation of the pointer and loss of information, depending on the memory model in use.

(355) implicit signed to unsigned conversion (Parser)

signed char sc;
unsigned int ui;
ui = sc;    /* if sc contains 0xff, ui will contain 0xffff for example */

will perform a sign extension of the char variable to the longer type. If you do not want this to take place, use a cast, for example:

ui = (unsigned char)sc;

(356) implicit conversion of float to integer (Parser)

double dd;
int i;
i = dd;    /* is this really what you meant? */

If you do intend to use an expression like this, then indicate that this is so by a cast:

i = (int)dd;

(357) illegal conversion of integer to pointer (Parser)

int * ip;
int i;
ip = i;    /* oops -- did you mean ip = &i ? */

If you do intend to use an expression like this, then indicate that this is so by a cast:

ip = (int *)i;

(358) illegal conversion of pointer to integer (Parser)

int * ip;
int i;
i = ip;    /* oops -- did you mean i = *ip ? */

If you do intend to use an expression like this, indicate your intention by a cast:

i = (int)ip;

(359) illegal conversion between pointer types (Parser)

long input;
char * cp;
cp = &input;  /* is this correct? */

This is a common way of accessing bytes within a multi-byte variable. To indicate that this is the intended operation of the program, use a cast:

cp = (char *)&input;  /* that’s better */

This warning can also occur when converting between pointers to objects that have the same type, but which have different qualifiers, for example:

char * cp;
/* yes, but what sort of characters? */
cp = "I am a string of characters";

If the default type for string literals is const char *, then this warning is quite valid. This should be written:

const char * cp;
cp = "I am a string of characters";  /* that’s better */

Omitting a qualifier from a pointer type is often disastrous and almost certainly not what you intend.

(360) array index out of bounds (Parser)

int i, * ip, input[10];
i = input[-2];           /* oops -- this element doesn’t exist */
ip = &input[5];
i = ip[-2];              /* this is okay */

(361) function declared implicit int (Parser)

/* I can prevent an error arising from calls below */
extern void set(long a, int b);
int main(void)
{
    /* at this point, a prototype for set() has already been seen */
    set(10L, 6);
}

(362) redundant “&” applied to array (Parser)

int array[5];
int * ip;
/* array is a constant, not a variable; the & is redundant. */
ip = &array;

(363) redundant “&” or “*” applied to function address (Parser)

extern void foo(void);
int main(void)
{
    void(*bar)(void);
    /* both assignments are equivalent */
    bar = &foo;
    bar = foo;  /* the & is redundant */
}

(364) attempt to modify object qualified * (Parser)

const int out = 1234;  /* "out" is read only */
out = 0;               /* oops -- writing to a read-only object */

(365) pointer to non-static object returned (Parser)

char * get_addr(void)
{
    char c;
    /* returning this is dangerous; the pointer could be dereferenced */
    return &c;
}

(366) operands of “*” not same pointer type (Parser)

The operands of this operator are of different pointer types. This probably means you have used the wrong pointer, but if the code is actually what you intended, use a typecast to suppress the error message.

(367) identifier is already extern; can’t be static (Parser)

int main(void)
{
    /* at this point the compiler assumes set is extern... */
    set(10L, 6);
}
/* now it finds out otherwise */
static void set(long a, int b)
{
    PORTA = a + b;
}

(368) array dimension on “*[ ]” ignored (Preprocessor)

/* param should be: "int array[]" or "int *" */
int get_first(int array[10])
{                             /* warning flagged here */
    return array[0];
}

(369) signed bitfields not supported (Parser)

struct {
    signed int sign: 1;    /* oops -- this must be unsigned */
    signed int value: 7;
} ;

(370) illegal basic type; int assumed (Parser)

/* here ling is assumed to be int */
unsigned char bar = (unsigned ling) ’a’;

(371) missing basic type; int assumed (Parser)

char c;
i;      /* don’t let the compiler make assumptions, use : int i */
func(); /* ditto, use: extern int func(int); */

(372) “,” expected (Parser)

unsigned char a;
/* thinks: chat & b are unsigned, but where is the comma? */
unsigned chat b;

(373) implicit signed to unsigned conversion (Parser)

unsigned int foo = -1;
/* the above initialization is implicitly treated as:
unsigned int foo = (unsigned) -1; */

(374) missing basic type; int assumed (Parser)

int i = (signed) 2; /* (signed) assumed to be (signed int) */

(375) unknown FNREC type “*” (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(376) bad non-zero node in call graph (Linker)

The linker has encountered a top level node in the call graph that is referenced from lower down in the call graph. This probably means the program has indirect recursion, which is not allowed when using a compiled stack.

(378) can’t create * file “*” (Hexmate)

This type of file could not be created. Is the file, or a file by this name, already in use?

(379) bad record type “*” (Linker)

This is an internal compiler error. Ensure that the object file is a valid object file. Contact Microchip Technical Support with details.

(380) unknown record type (*) (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(381) record “*” too long (*) (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(382) incomplete record: type = *, length = * (Dump, Xstrip)

This message is produced by the dump or xstrip utilities and indicates that the object file is not a valid object file, or that it has been truncated. Contact Microchip Technical Support with details.

(383) text record has length (*) too small (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(384) assertion failed: file *, line *, expression * (Linker, Parser)

This is an internal compiler error. Contact Microchip Technical Support with details.

(387) illegal or too many -G options (Linker)

There has been more than one linker -g option, or the -g option did not have any arguments following. The arguments specify how the segment addresses are calculated.

(388) duplicate -M option (Linker)

The map file name has been specified to the linker for a second time. This should not occur if you are using a compiler driver. If invoking the linker manually, ensure that only one instance of this option is present on the command line.

(389) illegal or too many -O options (Linker)

This linker -o flag is illegal, or another -o option has been encountered. A -o option to the linker must be immediately followed by a filename with no intervening space.

(390) missing argument to -P (Linker)

There have been too many -p options passed to the linker, or a -p option was not followed by any arguments. The arguments of separate -p options can be combined and separated by commas.

(391) missing argument to -Q (Linker)

The -Q linker option requires the machine type for an argument.

(392) missing argument to -U (Linker)

The -U (undefine) option needs an argument.

(393) missing argument to -W (Linker)

The -W option (listing width) needs a numeric argument.

(394) duplicate -D or -H option (Linker)

The symbol file name has been specified to the linker for a second time. This should not occur if you are using a compiler driver. If invoking the linker manually, ensure that only one instance of either of these options is present on the command line.

(395) missing argument to -J (Linker)

The maximum number of errors before aborting must be specified following the -j linker option.

(397) usage: hlink [-options] files.obj files.lib (Linker)

Improper usage of the command-line linker. If you are not invoking the linker directly, this could be an internal compiler error, and you should contact Microchip Technical Support with details.

(398) output file can’t be also an input file (Linker)

The linker has detected an attempt to write its output file over one of its input files. This cannot be done, because it needs to simultaneously read and write input and output files.

(400) bad object code format (Linker)

This is an internal compiler error. The object code format of an object file is invalid. Ensure it is a valid object file. Contact Microchip Technical Support with details.

(402) bad argument to -F (Objtohex)

The -F option for objtohex has been supplied an invalid argument. If you are not invoking this tool directly, this is an internal compiler error, and you should contact Microchip Technical Support with details.

(403) bad -E option: “*” (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(404) bad maximum length value to -<digits> (Objtohex)

The first value to the OBJTOHEX -n,m HEX length/rounding option is invalid.

(405) bad record size rounding value to -<digits> (Objtohex)

The second value to the OBJTOHEX -n,m HEX length/rounding option is invalid.

(406) bad argument to -A (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(407) bad argument to -U (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(408) bad argument to -B (Objtohex)

This option requires an integer argument in either base 8, 10, or 16. If you are not invoking this tool directly, this is an internal compiler error and you should contact Microchip Technical Support with details.

(409) bad argument to -P (Objtohex)

This option requires an integer argument in either base 8, 10, or 16. If you are not invoking this tool directly, this is an internal compiler error and you should contact Microchip Technical Support with details.

(410) bad combination of options (Objtohex)

The combination of options supplied to OBJTOHEX is invalid.

(412) text does not start at 0 (Objtohex)

Code in some things must start at zero. Here it doesn’t.

(413) write error on “*” (Assembler, Linker, Cromwell)

A write error occurred on the named file. This probably means you have run out of disk space.

(414) read error on “*” (Linker)

The linker encountered an error trying to read this file.

(415) text offset too low in COFF file (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(416) bad character (*) in extended TEKHEX line (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(417) seek error in “*” (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(418) image too big (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(419) object file is not absolute (Objtohex)

The object file passed to OBJTOHEX has relocation items in it. This can indicate it is the wrong object file, or that the linker or OBJTOHEX have been given invalid options. The object output files from the assembler are relocatable, not absolute. The object file output of the linker is absolute.

(420) too many relocation items (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(421) too many segments (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(422) no end record (Linker)

This object file has no end record. This probably means it is not an object file. Contact Microchip Technical Support if the object file was generated by the compiler.

(423) illegal record type (Linker)

There is an error in an object file. This is either an invalid object file, or an internal error in the linker. Contact Microchip Technical Support with details if the object file was created by the compiler.

(424) record too long (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(425) incomplete record (Objtohex, Libr)

The object file passed to OBJTOHEX or the librarian is corrupted. Contact Microchip Technical Support with details.

(427) syntax error in list (Objtohex)

There is a syntax error in a list read by OBJTOHEX. The list is read from standard input in response to an option.

(428) too many segment fixups (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(429) bad segment fixups (Objtohex)

This is an internal compiler error. Contact Microchip Technical Support with details.

(430) bad specification (Objtohex)

A list supplied to OBJTOHEX is syntactically incorrect.

(431) bad argument to -E (Objtoexe)

This option requires an integer argument in either base 8, 10, or 16. If you are invoking objtoexe directly then check this argument. Otherwise, this can be an internal compiler error and you should contact Microchip Technical Support with details.

(432) usage: objtohex [-ssymfile] [object-file [exe-file]] (Objtohex)

Improper usage of the command-line tool objtohex. If you are not invoking this tool directly, this is an internal compiler error and you should contact Microchip Technical Support with details.

(434) too many symbols (*) (Linker)

There are too many symbols in the symbol table, which has a limit of * symbols. Change some global symbols to local symbols to reduce the number of symbols.

(435) bad segment selector “*” (Linker)

-GA/f0+10

Did you forget the radix?

-GA/f0h+10

(436) psect “*” re-orged (Linker)

This psect has had its start address specified more than once.

(437) missing “=” in class spec (Linker)

A class spec needs an = sign, e.g., -Ctext=ROM.

(438) bad size in -S option (Linker)

-SCODE=f000

Did you forget the radix?

-SCODE=f000h

(439) bad -D spec: “*” (Linker)

-DCODE

What is the delta value for this class? Possibly, you meant something like:

-DCODE=2

(440) bad delta value in -D spec (Linker)

The delta value supplied to a -D specification is invalid. This value should an integer of base 8, 10, or 16.

(441) bad -A spec: “*” (Linker)

-ACODE

What is the range for this class? Possibly, you meant:

-ACODE=0h-1fffh

(442) missing address in -A spec (Linker)

-ACODE=

What is the range for this class? Possibly, you meant:

-ACODE=0h-1fffh

(443) bad low address “*” in -A spec (Linker)

-ACODE=1fff-3fffh

Did you forget the radix?

-ACODE=1fffh-3fffh

(444) expected “-” in -A spec (Linker)

-AROM=1000h

Possibly, you meant:

-AROM=1000h-1fffh

(445) bad high address “*” in -A spec (Linker)

-ACODE=0h-ffff

Did you forget the radix?

-ACODE=0h-ffffh

(446) bad overrun address “*” in -A spec (Linker)

-AENTRY=0-0FFh-1FF

Did you forget the radix?

-AENTRY=0-0FFh-1FFh

(447) bad load address “*” in -A spec (Linker)

-ACODE=0h-3fffh/a000

Did you forget the radix?

-ACODE=0h-3fffh/a000h

(448) bad repeat count “*” in -A spec (Linker)

-AENTRY=0-0FFhxf

Did you forget the radix?

-AENTRY=0-0FFhxfh

(449) syntax error in -A spec: * (Linker)

-AROM=1000h-1FFFh

(450) psect “*” was never defined, or is local (Linker)

This psect has been listed in a -P option, but is not defined in any module within the program. Alternatively, the psect is defined using the local psect flag, but with no class flag; and, so, cannot be linked to an address. Check the assembly list file to ensure that the psect exists and that it is does not specify the local psect flag.

(451) bad psect origin format in -P option (Linker)

-pbss=f000

Did you forget the radix?

-pbss=f000h

(452) bad “+” (minimum address) format in -P option (Linker)

-pbss=data+f000

Did you forget the radix?

-pbss=data+f000h

(453) missing number after “%” in -P option (Linker)

The % operator in a -p option (for rounding boundaries) must have a number after it.

(454) link and load address can’t both be set to “.” in -P option (Linker)

-Pmypsect=1000h/.
-Pmypsect=./1000h

Both of these options are valid and equivalent. However, the following usage is ambiguous:

-Pmypsect=./.

What is the link or load address of this psect?

(455) psect “*” not relocated on 0x* byte boundary (Linker)

This psect is not relocated on the required boundary. Check the relocatability of the psect and correct the -p option if necessary.

(456) psect “*” not loaded on 0x* boundary (Linker)

This psect has a relocatability requirement that is not met by the load address given in a -p option. For example, if a psect must be on a 4K byte boundary, you could not start it at 100H.

(459) remove failed; error: *, * (Xstrip)

The creation of the output file failed when removing an intermediate file.

(460) rename failed; error: *, * (Xstrip)

The creation of the output file failed when renaming an intermediate file.

(461) can’t create * file “*” (Assembler, Code Generator)

This is an internal compiler error. Contact Microchip Technical Support with details.

(464) missing key in avmap file (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(465) undefined symbol “*” in FNBREAK record (Linker)

The linker has found an undefined symbol in the FNBREAK record for a non-reentrant function. Contact Microchip Technical Support if this is not handwritten assembler code.

(466) undefined symbol “*” in FNINDIR record (Linker)

The linker has found an undefined symbol in the FNINDIR record for a non-reentrant function. Contact Microchip Technical Support if this is not handwritten assembler code.

(467) undefined symbol “*” in FNADDR record (Linker)

The linker has found an undefined symbol in the FNADDR record for a non-reentrant function. Contact Microchip Technical Support if this is not handwritten assembler code.

(468) undefined symbol “*” in FNCALL record (Linker)

The linker has found an undefined symbol in the FNCALL record for a non-reentrant function. Contact Microchip Technical Support if this is not handwritten assembler code.

(469) undefined symbol “*” in FNROOT record (Linker)

The linker has found an undefined symbol in the FNROOT record for a non-reentrant function. Contact Microchip Technical Support if this is not handwritten assembler code.

(470) undefined symbol “*” in FNSIZE record (Linker)

The linker has found an undefined symbol in the FNSIZE record for a non-reentrant function. Contact Microchip Technical Support if this is not handwritten assembler code.

(471) recursive function calls: (Linker)

int test(int a)
{
    if(a == 5) {
    /* recursion cannot be supported by some compilers */
        return test(a++);
     }
    return 0;
}

(472) non-reentrant function “*” appears in multiple call graphs: rooted at “*” and “*”
 (Linker)

void interrupt my_isr(void)
{
    scan(6);     /* scan is called from an interrupt function */
}
void process(int a)
{
    scan(a);     /* scan is also called from main-line code */
}

(473) function “*” is not called from specified interrupt_level (Linker)

#pragma interrupt_level 1
void foo(void)
{
    ...
}
#pragma interrupt_level 1
void interrupt bar(void)
{
    // this function never calls foo()
}

(474) no psect specified for function variable/argument allocation (Linker)

The FNCONF assembler directive which specifies to the linker information regarding the auto/parameter block was never seen. This is supplied in the standard runtime files if necessary. This error can imply that the correct run-time startup module was not linked. Ensure you have used the FNCONF directive if the runtime startup module is hand-written.

(475) conflicting FNCONF records (Linker)

The linker has seen two conflicting FNCONF directives. This directive should be specified only once and is included in the standard runtime startup code which is normally linked into every program.

(476) fixup overflow referencing * * (location 0x* (0x*+*), size *, value 0x*) (Linker)

The linker was asked to relocate (fixup) an item that would not fit back into the space after relocation. See the following error message (1356) for more information.

(477) fixup overflow in expression (location 0x* (0x*+*), size *, value 0x*) (Linker)

The linker was asked to relocate (fixup) an item that would not fit back into the space after relocation. See the following error message (1356) for more information.

(478) * range check failed (location 0x* (0x*+*), value 0x* > limit 0x*) (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(479) circular indirect definition of symbol “*” (Linker)

The specified symbol has been equated to an external symbol which, in turn, has been equated to the first symbol.

(480) function signatures do not match: * (*): 0x*/0x* (Linker)

extern int get_value(int in);
/* and in another module: */
/* this is different to the declaration */
int get_value(int in, char type)
{

(481) common symbol “*” psect conflict (Linker)

A common symbol has been defined to be in more than one psect.

(482) symbol “*” is defined more than once in “*” (Assembler)

_next:
    MOVE r0, #55
    MOVE [r1], r0
_next:           ; oops -- choose a different name

The linker will issue this warning if the symbol (C or assembler) was defined multiple times in different modules. The names of the modules are given in the error message. Note that C identifiers often have an underscore prepended to their name after compilation.

(483) symbol “*” can’t be global (Linker)

This is an internal compiler error. Contact Microchip Technical Support with details.

(484) psect “*” can’t be in classes “*” and “*” (Linker)

psect final,class=CODE
finish:
    /* elsewhere: */
psect final,class=ENTRY

(485) unknown “with” psect referenced by psect “*” (Linker)

psect starttext,class=CODE,with=rext
; was that meant to be with text?

(486) psect “*” selector value redefined (Linker)

The selector value for this psect has been defined more than once.

(487) psect “*” type redefined: */* (Linker)

This psect has had its type defined differently by different modules. This probably means you are trying to link incompatible object modules, i.e., linking 386 flat model code with 8086 real mode code.

(488) psect “*” memory space redefined: */* (Linker)

psect spdata,class=RAM,space=0
    ds 6
; elsewhere:
psect spdata,class=RAM,space=1

(489) psect “*” memory delta redefined: */* (Linker)

psect final,class=CODE,delta=2
finish:
; elsewhere:
psect final,class=CODE,delta=1

(490) class “*” memory space redefined: */* (Linker)

A class has been defined in two different memory spaces. Either rename one of the classes or, if they are the same class, place them in the same memory space.

(491) can’t find 0x* words for psect “*” in segment “*” (Linker)

One of the main tasks the linker performs is positioning the blocks (or psects) of code and data that is generated from the program into the memory available for the target device. This error indicates that the linker was unable to find an area of free memory large enough to accommodate one of the psects. The error message indicates the name of the psect that the linker was attempting to position and the segment name which is typically the name of a class which is defined by a -A linker option issued by the compiler driver. Typically psect names which are, or include, text relate to program code. Names such as bss or data refer to variable blocks. This error can be due to two reasons.

First, the size of the program or the program’s data has exceeded the total amount of space on the selected device. In other words, some part of your device’s memory has completely filled. If this is the case, then the size of the specified psect must be reduced.

The second cause of this message is when the total amount of memory needed by the psect being positioned is sufficient, but that this memory is fragmented in such a way that the largest contiguous block is too small to accommodate the psect. The linker is unable to split psects in this situation. That is, the linker cannot place part of a psect at one location and part somewhere else. Thus, the linker must be able to find a contiguous block of memory large enough for every psect. If this is the cause of the error, then the psect must be split into smaller psects if possible.

To find out what memory is still available, generate and look in the map file. Search for the string UNUSED ADDRESS RANGES. Under this heading, look for the name of the segment specified in the error message. If the name is not present, then all the memory available for this psect has been allocated. If it is present, there will be one address range specified under this segment for each free block of memory. Determine the size of each block and compare this with the number of words specified in the error message.

Psects containing code can be reduced by using all the compiler’s optimizations, or restructuring the program. If a code psect must be split into two or more small psects, this requires splitting a function into two or more smaller functions (which can call each other). These functions can need to be placed in new modules.

Psects containing data can be reduced when invoking the compiler optimizations, but the effect is less dramatic. The program can need to be rewritten so that it needs less variables. If the default linker options must be changed, this can be done indirectly through the driver using the driver -Wl, option. If a data psect cannot be positioned, then you typically need to reduce the total size of variables being used.

For example, after receiving the message:

Can’t find 0x34 words (0x34 withtotal) for psect text in segment CODE (error)

look in the map file for the ranges of unused memory.

UNUSED ADDRESS RANGES
CODE             00000244-0000025F
                 00001000-0000102f
RAM              00300014-00301FFB

In the CODE segment, there is 0x1c (0x25f-0x244+1) bytes of space available in one block and 0x30 available in another block. Neither of these are large enough to accommodate the psect text which is 0x34 bytes long. Notice that the total amount of memory available is larger than 0x34 bytes. If the function that is encoded into the text psect can be split into two smaller functions, there is a chance the program will link correctly.

(492) attempt to position absolute psect “*” is illegal (Linker)

This psect is absolute and should not have an address specified in a -P option. Either remove the abs psect flag, or remove the -P linker option.

(493) origin of psect “*” is defined more than once (Linker)

The origin of this psect is defined more than once. There is most likely more than one -p linker option specifying this psect.

(494) bad -P format “*/*” (Linker)

-Ptext=10g0h

Possibly, you meant:

-Ptext=10f0h

(495) use of both “with=” and “INCLASS/INCLASS” allocation is illegal (Linker)

It is not legal to specify both the link and location of a psect as within a class, when that psect was also defined using a with psect flag.

(497) psect “*” exceeds max size: *h > *h (Linker)

The psect has more bytes in it than the maximum allowed as specified using the size psect flag.

(498) psect “*” exceeds address limit: *h > *h (Linker)

The maximum address of the psect exceeds the limit placed on it using the limit psect flag. Either the psect needs to be linked at a different location or there is too much code/data in the psect.

(499) undefined symbol: (Assembler, Linker)

The symbol following is undefined at link time. This could be due to spelling error, or failure to link an appropriate module.