8.1 Configuring PSFP using Web GUI

To configure the PSFP, perform the following steps:

  1. To enable VLAN hybrid on both Ingress and Egress ports, see Time Aware Shaper.
  2. Click TSN > Streams. The Stream Configuration Overview page opens.
    Figure 8-2. Stream Configuration Overview
  3. To add a stream, click + .
  4. In the Stream Configuration page, perform the following configuration:
    1. To set the Stream ID, type a suitable number in the Stream ID box.
    2. To add VLAN tags, configure the properties as shown in the following figure.
    3. To select the the port members (Ingress and Egress), select the appropriate Member check box.
    4. Click Save.
    Figure 8-3. Stream Configuration
    A screenshot of a computer Description automatically generated
  5. Click TSN > PSFP > Stream Filter. The PSFP Stream Filter Configuraion page opens.
    Figure 8-4. PSFP Stream Filter Configuration
  6. Click Add New Entry, and then configure the details as shown in the following figure:
    1. Type a suitable number in the Stream ID box.
    2. To enable FMI, select the FMI Enable check box.
    3. To enable the oversize block, select the Oversize Block Enable checkbox.
    4. Click Save.
  7. Click TSN > PSFP > Flow Meter. The PSFP Flow Meter Configuration page opens.
    Figure 8-5. PSFP Flow Meter Configuration
  8. Click Add New Entry, and then configure the details as shown in the following figure:
    1. To set FMI ID, type a suitable number in the FMI ID box.
    2. To set CIR (bandwidth in KHz), type a suitable number in the CIR box.
    3. Click Save.