2.1.1 Setting Up the Board

Setting up the Hardware involves Scalable Low-Voltage Signaling (SLVS) FMC camera daughter card with PolarFire Video Kit and interface with HDMI Display.

To set up the hardware, perform the following steps:

1. Connect the Microchip IMX530 SLVS FMC Camera Daughter card to the J14 FMC Connector on the video kit.
2. Connect the power supply cable to J20 of the video kit.
3. Connect the host PC to the PolarFire Video Kit through J12 using a USB mini cable.
4. Connect the HDMI 1920x1080 display to J1 (HDMI 2.0 TX port) of the video kit.
5. Power up the HDMI monitor.
6. Power up the board using the SW4 slide switch.