17.7.3 IOCxP

Interrupt-on-Change Positive Edge Register

Important:

If MCLRE = 1 or LVP = 1, the MCLR pin port functionality is disabled and IOC on that pin is not available.
Refer to the “Pin Allocation Table” for details about pins with configurable IOC per port.

Name:

IOCxP


Bit	7	6	5	4	3	2	1	0
	IOCxP7	IOCxP6	IOCxP5	IOCxP4	IOCxP3	IOCxP2	IOCxP1	IOCxP0
Access	R/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset	0	0	0	0	0	0	0	0

Bits 0, 1, 2, 3, 4, 5, 6, 7 – IOCxPn Interrupt-on-Change Positive Edge Enable

Value	Description
`1`	Interrupt-on-Change enabled on the IOCx pin for a positive-going edge. Associated Status bit and interrupt flag will be set upon detecting an edge.
`0`	Rising edge Interrupt-on-Change disabled for the associated pin.

If MCLRE = 1 or LVP = 1, the MCLR pin port functionality is disabled and IOC on that pin is not available. Refer to the “Pin Allocation Table” for details about pins with configurable IOC per port.