v2024.2

1 What's New
Information about what is new in Libero SoC Design Suite
2 Download Help
Information to help you download the Libero SoC Design Suite documentation
3 SmartHLS Compiler
Information about SmartHLS Compiler
4 Installation and Licensing
Information about Libero SoC software installation and licensing
5 Design Flow
Information about Design Flow
6 Block Flow
Information about Block Flow
7 SmartDesign
Information about SmartDesign
8 Netlist Viewer
Information about Netlist Viewer
9 I/O Editor
Information about I/O Editor
- 9 Introduction
- 9.1 Invoking the I/O Editor
- 9.2 Port View
- 9.3 Pin View
- 9.4 Package View
- 9.5 Interface—Specific I/Os and Views
- 9.6 Memory Interface View
- 9.7 XCVR View
- 9.8 IOD View
- 9.9 Floorplanner View
- 9.10 Other I/O Editor Windows
- 9.11 Export Physical Constraints (PDC)
- 9.12 Appendix
  - 9.12.1 MSS I/O Placement
  - 9.12.2 Bank Settings
  - 9.12.3 IOSTD Support per Type of Bank
  - 9.12.4 Port IOSTD Settings
  - 9.12.5 Updating the I/O Banks and IOSTD
  - 9.12.6 Designs without an MSS Macro
  - 9.12.7 Default Bank Settings
    If there is an MSS macro in the design and some interfaces are not used, this is the default bank settings that will be used.
  - 9.12.8 PDC Setting
  - 9.12.9 PolarFire SOC MSS I/O Attributes
10 PDC Commands
Information about PDC commands for all families
11 Chip Planner
Information about Chip Planner
12 Timing Constraints Editor
Information about Timing Constraints Editor
13 SmartTime Static Timing Analyzer
Information about SmartTime Static Timing Analyzer
14 SmartPower
Information about SmartPower
15 Programming and Debugging
Information about Programming and Debugging
16 Macro Library
Information about Macro Library for SmartFusion2, IGLOO2 and PolarFire
17 Custom Flow
Information about Custom Flow
18 Design Separation Methodology
Information about Design Separation Methodology
19 Microchip Separation Verification Tool
Information about Microchip Separation Verification Tool
20 PolarFire SoC Microcontroller Subsystem (MSS)
Information about PolarFire SoC Microcontroller Subsystem (MSS)
21 Tcl Command Reference
Information about Tcl Command Reference
22 Additional Information
Additional information about other Microchip products
23 Technical Support
24 About Microchip
More information about Microchip

9.12.8 PDC Setting

A PDC file is not needed for these I/Os because the settings from the MSS Configurator are being used. If the user specifies a correct placement and I/O standard, the tool will accept the user’s settings and will not error-out. But if the user tries to set any of the other specific MSS I/O attributes, it will fail. These constraints will not be written in the generated PDC file from the Chip Planner.