12.5.2 OSCCON1

Oscillator Control Register 1

Note:

The default value is determined by the RSTOSC Configuration bits. See the Reset Oscillator (RSTOSC) selection table for the RSTOSC selections.
If NOSC is written with a reserved value, the operation is ignored and neither NOSC nor NDIV is written.
When CSWEN = 0, these bits are read-only and cannot be changed from the RSTOSC value.

Name:	OSCCON1
Address:	0x07A


Bit	7	6	5	4	3	2	1	0
		NOSC[2:0]			NDIV[3:0]
Access		R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset		f	f	f	q	q	q	q

Bits 6:4 – NOSC[2:0] New Oscillator Source Request^(1,2,3)

Requests a new oscillator source per the NOSC/COSC Clock Source Selection Table.

Bits 3:0 – NDIV[3:0] New Divider Selection Request

Requests the new postscaler division ratio per the NDIV/CDIV Clock Divider Selection Table.

The default value is determined by the RSTOSC Configuration bits. See the Reset Oscillator (RSTOSC) selection table for the RSTOSC selections. If NOSC is written with a reserved value, the operation is ignored and neither NOSC nor NDIV is written. When CSWEN = 0, these bits are read-only and cannot be changed from the RSTOSC value.

12.5.2 OSCCON1

Bits 6:4 – NOSC[2:0] New Oscillator Source Request(1,2,3)

Bits 3:0 – NDIV[3:0] New Divider Selection Request

Bits 6:4 – NOSC[2:0] New Oscillator Source Request^(1,2,3)