2.2.1 NVM Programming Does Not Work Below 2.7V

Performing an erase or write operation when V_DD is below 2.7V may fail. Recommending to make sure that V_DD is above 2.7V before starting an erase or a write operation. Alternatively, BOD can be enabled with a level set to BODLEVEL2 or higher.

Work Around

None.

Affected Silicon Revisions


Rev. A0	Rev. A2	Rev. A4
X	-	-

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.