If AES_MR.LOD = 0

This mode may be used for all AES operating modes except CBC-MAC where AES_MR.LOD = 1 mode is recommended.

The end of the encryption/decryption is indicated by the end of DMA transfer associated to AES_ODATARx (see the following figure). Two DMA channels are required: one for writing message blocks to AES_IDATARx and one to obtain the result from AES_ODATARx.

Figure 7-4. DMA Transfer with AES_MR.LOD = 0

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.