3.3.10.3.2 NCS Waveforms

The NCS signal waveforms in write operations are not the same than those applied in read operations, but are defined separately:

NCS_WR_SETUP—NCS setup time is defined as the setup time of address before the NCS falling edge.
NCS_WR_PULSE—NCS pulse length is the time between NCS falling edge and NCS rising edge.
NCS_WR_HOLD—NCS hold time is defined as the hold time of address after the NCS rising edge.

Figure 3-21. Write Cycle

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.