| Document |
|
| Device |
- Introduction:
- Added
a note for automotive data sheets
- Changed text to align with all tinyAVR® 0- and 1-series data
sheets
- Retention
endurance numbers added
- Data Sheet
Clarification Document section added
- Ordering
Information moved
- I/O
Multiplexing and Considerations updated
- Reset Pin
Selection table removed
|
| Memories |
- Unsupported
AUX rows from overview tables removed
|
| Configuration and User Fuses |
- RSTPINCFG:
Time-out after a system reset when fused to be GPIO
explained
|
| BOD - Brown-out Detector |
- Removed
levels not characterized by minimum and maximum values
- Added a note
for typical values and reference to electrical
characteristics
|
| TCA |
- Added a note
for alternative WOn pins
|
| USART |
- Clarified
One-Wire mode
- Clarified
text about Disabling the Transmitter
- Reverted 32±6
to 16±3 baud samples in RXMODE bits in CTRLB
|
| SPI |
- Clarified
functionality for SPI SS pin
|
| CRCSCAN |
- Added a
missing MODE bit field
|
| UPDI |
- GPIO
functionality disabled for a period after a system reset,
changed from ms to clock cycles
|
| Electrical Characteristics |
- Added a note
for Chip Erase in General Operating Ratings
|
| Errata |
- Errata moved
to a separate document
|
| Ordering Information |
- Updated with
product page links and ordering codes
|
| Product Identification System |
- Updated with
Tube and Tray packing media
|
| Package Drawings |
- Updated
package drawings to Microchip standard
|
