29.8.8 Event User m

Name: USERm
Offset: 0x80 + m*0x04 [m=0..30]
Reset: 0x00000000
Property: PAC Write-Protection

Bit 3130292827262524 
          
Access  
Reset  
Bit 2322212019181716 
          
Access  
Reset  
Bit 15141312111098 
          
Access  
Reset  
Bit 76543210 
     CHANNEL[3:0] 
Access R/WR/WR/WR/W 
Reset 0000 

Bits 3:0 – CHANNEL[3:0] Channel Event Selection

These bits are used to select the channel to connect to the event user.

Note that to select channel m, the value (m+1) must be written to the USER.CHANNEL bit group.

ValueChannel Number
0x00No channel output selected
0x010
0x021
0x032
0x043
0x054
0x065
0x076
0x087
0x09-0xFFReserved
Table 29-2. User Multiplexer Number
USERmUser MultiplexerDescriptionPath Type
m = 0RTC TAMPEVTTamper EventAsynchronous, synchronous, and resynchronized paths
m = 1PORT EV0Event 0Asynchronous, synchronous, and resynchronized paths
m = 2PORT EV1Event 1Asynchronous, synchronous, and resynchronized paths
m = 3PORT EV2Event 2Asynchronous, synchronous, and resynchronized paths
m = 4PORT EV3Event 3Asynchronous, synchronous, and resynchronized paths
m = 5DMAC CH0Channel 0Synchronous, and resynchronized paths
m = 6DMAC CH1Channel 1Synchronous, and resynchronized paths
m = 7DMAC CH2Channel 2Synchronous, and resynchronized paths
m = 8DMAC CH3Channel 3Synchronous, and resynchronized paths
m = 9TCC0 EV0-Asynchronous, synchronous, and resynchronized paths
m = 10TCC0 EV1-Asynchronous, synchronous, and resynchronized paths
m = 11TCC0 MC0Match/Capture 0Asynchronous, synchronous, and resynchronized paths
m = 12TCC0 MC1Match/Capture 1Asynchronous, synchronous, and resynchronized paths
m = 13TCC0 MC2Match/Capture 2Asynchronous, synchronous, and resynchronized paths
m = 14TCC0 MC3Match/Capture 3Asynchronous, synchronous, and resynchronized paths
m = 15TC0-Asynchronous, synchronous, and resynchronized paths
m = 16TC1-Asynchronous, synchronous, and resynchronized paths
m = 17TC2-Asynchronous, synchronous, and resynchronized paths
m = 18TC3-Asynchronous, synchronous, and resynchronized paths
m = 19ADC STARTADC start conversionAsynchronous, synchronous, and resynchronized paths
m = 20ADC SYNCFlush ADCAsynchronous, synchronous, and resynchronized paths
m = 21AC COMP0Start comparator 0Asynchronous, synchronous, and resynchronized paths
m = 22AC COMP1Start comparator 1Asynchronous, synchronous, and resynchronized paths
m = 23PTC STCONVPTC start conversionAsynchronous, synchronous, and resynchronized paths
m = 24CCL LUTIN 0CCL inputAsynchronous, synchronous, and resynchronized paths
m = 25CCL LUTIN 1CCL inputAsynchronous, synchronous, and resynchronized paths
m = 26CCL LUTIN 2CCL inputAsynchronous, synchronous, and resynchronized paths
m = 27CCL LUTIN 3CCL inputAsynchronous, synchronous, and resynchronized paths
m = 29MTB STARTTracing startAsynchronous, synchronous, and resynchronized paths
m = 30MTB STOPTracing stopAsynchronous, synchronous, and resynchronized paths