1.1.2 ‘Write 0’ Signal
A ‘Write 0’ signal is shown in the figure below. The host pulls the bus
low for a period of at least 60 μs, with a maximum length of 120 μs.
0’
Signal
1.1.2 ‘Write
0’ Signal A ‘Write 0’ signal is shown in the figure below. The host pulls the bus
low for a period of at least 60 μs, with a maximum length of 120 μs.
0’
SignalThe online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.