9.23.1.1 +WPROVC

This command is used to read or set the provisioning service configuration. This command is a configuration command which supports setting and getting parameter values. The behaviour of configuration commands is described in general in the 9.2.3 Configuration Commands section.

Security – Default Security for the command is: GGGG

Table 9-248. Command Syntax
Command	Description	Security
`AT+WPROVC`	Query all configuration elements	`GGGG`
`AT+WPROVC=<ID>`	Query a single element	`GGGG`
`AT+WPROVC=<ID>,<VAL>`	Set a single element	`GGGG`

Table 9-249. Command Parameter Syntax
Parameter Name	Type	Description
`<ID>`	Integer	Parameter ID number
`<VAL>`	Integer String Byte Array	Parameter value

Table 9-250. Response Syntax
Response	Description
`+WPROVC:<ID>,<VAL>`	Read response

Table 9-251. Response Element Syntax
Element Name	Type	Description
`<ID>`	Integer	Parameter ID number
`<VAL>`	Any	Parameter value

Table 9-252. Configuration Parameters
ID	Name	Type	Description	Security
1	`<PORT>`	Unsigned Integer	Service listening port	`GGGG`
2	`<ASCII>`	Bool (Read Only)	ASCII or binary protocol `0` – Binary protocol `1` – ASCII protocol	`GGGG`