9.23.1.2 +WPROV

This command is used to control or query the provisioning service

Security – Default Security for the command is: GGGG

Table 9-253. Command Syntax
Command	Description	Security
`AT+WPROV`	Read status of provisioning service	`GGGG`
`AT+WPROV=<STATE>`	Set state of provisioning service	`GGGG`

Table 9-254. Command Parameter Syntax
Parameter Name	Type	Description
`<STATE>`	Integer	State of the provisioning service `0` – Disable `1` – Use configuration from `+WPROVC` command

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.