9.15.1.10 +SOCKCL

This command is used to close a socket.

Security – Default Security for the command is: GGGG

Table 9-145. Command Syntax
Command	Description	Security
`AT+SOCKCL=<SOCK_ID>`	Close socket	`GGGG`

Table 9-146. Command Parameter Syntax
Parameter Name	Type	Description
`<SOCK_ID>`	Integer	The socket ID. Valid range is 1-65535

Table 9-147. Response Syntax
Response	Description
`+SOCKCL:<SOCK_ID>`	Socket close response

Table 9-148. Response Element Syntax
Element Name	Type	Description
`<SOCK_ID>`	Integer	The socket ID. Valid range is 1-65535

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.