26.1.1 8-Bit Mode

In this mode, Timer0 increments on the rising edge of the selected clock source. A prescaler on the clock input gives several prescale options (see the prescaler control bits, CKPS). In this mode, as shown in Figure 26-1, a buffered version of TMR0H is maintained.

This is compared with the value of TMR0L on each cycle of the selected clock source. When the two values match, the following events occur:

TMR0L is reset
The contents of TMR0H are copied to the TMR0H buffer for next comparison

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.