32.10.5 Digital to Analog Converter (DAC) Characteristics

Table 32-28. Operating Conditions
Symbol	Parameter	Conditions	Min.	Typ.	Max.	Units
V_DDANA	Analog supply voltage		1.62	-	3.63	V
AV_REF	External reference voltage		1.0	-	V_DDANA-0.6	V
	INT1V⁽²⁾		-	1	-	V
	VDDANA		-	V_DDANA	-	V
	Linear output voltage range		0.05	-	V_DDANA-0.05	V
	Minimum resistive load		5	-	-	kΩ
	Maximum capacitance load		-	-	100	pF
I_DD	DC supply current⁽¹⁾	Voltage pump disabled	-	160	230	μA

Note:

These values are based on characterization, and are not covered by test limits in production.
It is the buffered internal reference of 1.0V derived from the internal 1.1V bandgap reference.

Table 32-29. Clock and Timing
Symbol	Parameter	Conditions		Min.	Typ.	Max.	Units
	Conversion rate	C_load = 100pF R_load > 5kΩ	Normal mode	-	-	350	ksps
	Conversion rate	C_load = 100pF R_load > 5kΩ	For Δ_DATA = +/-1	-	-	1000	ksps
	Startup time	V_DDNA > 2.6V		-	-	2.85	μs
	Startup time	V_DDNA < 2.6V		-	-	10	μs

Note: The values in this table are based on simulation, and are not covered by test limits in production or characterization.

Table 32-30. Accuracy Characteristics (Device Variant A)
Symbol	Parameter	Conditions ⁽¹⁾		Min.	Typ.	Max.	Units
RES	Input resolution			-	-	10	Bits
INL	Integral non-linearity	V_REF = Ext 1.0V	V_DD= 1.6V	0.75	1.1	2.5	LSB
		V_REF = Ext 1.0V	V_DD= 3.6V	0.6	1.2	1.5
		V_REF = V_DDANA	V_DD= 1.6V	1.4	2.2	2.5
		V_REF = V_DDANA	V_DD= 3.6V	0.9	1.4	1.5
		V_REF = INT1V	V_DD= 1.6V	0.75	1.3	1.5
		V_REF = INT1V	V_DD= 3.6V	0.8	1.2	1.5
DNL	Differential non-linearity	V_REF = Ext 1.0V	V_DD= 1.6V	±0.9	±1.2	±1.5	LSB
		V_REF = Ext 1.0V	V_DD= 3.6V	±0.9	±1.1	±1.2
		V_REF = V_DDANA	V_DD= 1.6V	±1.1	±1.5	±1.7
		V_REF = V_DDANA	V_DD= 3.6V	±1.0	±1.1	±1.2
		V_REF = INT1V	V_DD= 1.6V	±1.1	±1.4	±1.5
		V_REF = INT1V	V_DD= 3.6V	±1.0	±1.5	±1.6
GE	Gain error	Ext. V_REF		±1.5	±5	±10	mV
OE	Offset error	Ext. V_REF		±2	±3	±6	mV

Note:

All values are measured using a conversion rate of 35 ksps .

Table 32-31. Accuracy Characteristics (Device Variant B)
Symbol	Parameter	Conditions ⁽¹⁾		Min.	Typ.	Max.	Units
RES	Input resolution	-	-	-	-	10	Bits
INL	Integral non-linearity	VREF = Ext 1.0V	VDD = 1.6V	0.75	1.1	2.5	LSB
		VREF = Ext 1.0V	VDD = 3.6V	0.6	1.2	1.5
		VREF = VDDANA	VDD = 1.6V	1.4	2.2	2.5
		VREF = VDDANA	VDD = 3.6V	0.9	1.4	1.5
		VREF = INT1V	VDD = 1.6V	0.75	1.3	3.1
		VREF = INT1V	VDD = 3.6V	0.8	1.2	2.7
DNL	Differential non-linearity	VREF = Ext 1.0V	VDD = 1.6V	±0.9	±1.2	±1.5	LSB
		VREF = Ext 1.0V	VDD = 3.6V	±0.9	±1.1	±1.2
		VREF = VDDANA	VDD = 1.6V	±1.1	±1.5	±1.7
		VREF = VDDANA	VDD = 3.6V	±1.0	±1.1	±1.2
		VREF = INT1V	VDD = 1.6V	±1.1	±1.4	±3.0
		VREF = INT1V	VDD = 3.6V	±1.0	±1.5	±2.9
GE	Gain error	Ext. VREF		±1.5	±5	±10	mV
OE	Offset error	Ext. VREF		±2	±3	±6	mV

Note:

All values are measured using a conversion rate of 35 ksps.

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.