Appendix A - Revision History

Doc Rev.	Date	Comments
F	8/2023	Updated content on section “7.1 Introduction” Updated content on section “15.4.2 Status and Output Data” Updated section “16. Building Applications Using MCC” Added section “16.1 Touch example project” Updated content on section “17.1 Overview” Updated content on section “17.2 Datastreamer Module” Updated content on section “17.3 Debugging Using Data Visualizer”
E	3/2020	Added support for AVR-DA devices. Added new content to section “7.1 Introduction”. Removing section “7.2 Parallel 4P – 1 From 4”. Updating table in section “6.4.1 Data Structures”. Updated table in sections “12.1 Overview”, “13.1 Overview”, “19. Known Issues”, and “18.1 Tuning for Noise Performance”. Other minor corrections.
D	3/2019	Added new section “4P Parallel Acquisition Module”.
C	6/2018	Updated “Module Naming Conventions” and “Appendix B” sections with new devices.
B	5/2018	Added 2D Touch Surface and Gesture module support.
A	12/2017	Microchip DS40001986 Revision A replaces Atmel 42805A. Revised sections: Updated the screen shots in the KIT example/user board project creation section with the latest QTouch Configurator GUI. Included picture for the Touch Key sensors and included graphs on the introduction section. Additions: New section “Known Issues” is added.
C	06/2017	Revised sections: Touch Library introduction, Data Visualizer, Atmel START Configurator. Additions: Acquisition module, Touch key module, Frequency hop module, Frequency Hop Auto-tune module, Slider/Wheel module, Binding Layer module, MISRA report, API Reference for each module, Kit example projects, Module naming conventions, API files interface.
B	02/2017	Added SAM D10/D11 Library information.
A	11/2016	Initial document release.

F

8/2023

Updated content on section “7.1 Introduction”

Updated content on section “15.4.2 Status and Output Data”

Updated section “16. Building Applications Using MCC”

Added section “16.1 Touch example project”

Updated content on section “17.1 Overview”

Updated content on section “17.2 Datastreamer Module”

Updated content on section “17.3 Debugging Using Data Visualizer”

E

3/2020

Added support for AVR-DA devices.

Added new content to section “7.1 Introduction”.

Removing section “7.2 Parallel 4P – 1 From 4”.

Updating table in section “6.4.1 Data Structures”.

Updated table in sections “12.1 Overview”, “13.1 Overview”, “19. Known Issues”, and “18.1 Tuning for Noise Performance”.

Other minor corrections.

D

3/2019

Added new section “4P Parallel Acquisition Module”.

C

6/2018

Updated “Module Naming Conventions” and “Appendix B” sections with new devices.

B

5/2018

Added 2D Touch Surface and Gesture module support.

A

12/2017

Microchip DS40001986 Revision A replaces Atmel 42805A.

Revised sections:

Updated the screen shots in the KIT example/user board project creation section with the latest QTouch Configurator GUI.

Included picture for the Touch Key sensors and included graphs on the introduction section.

Additions:

New section “Known Issues” is added.

C

06/2017

Revised sections:

Touch Library introduction, Data Visualizer, Atmel START Configurator.

Additions:

Acquisition module, Touch key module, Frequency hop module, Frequency Hop Auto-tune module, Slider/Wheel module, Binding Layer module, MISRA report, API Reference for each module, Kit example projects, Module naming conventions, API files interface.

B

02/2017

Added SAM D10/D11 Library information.

A

11/2016

Initial document release.