29.9.5 TUxyTMR (16-bit)

Timer Counter Register for 16-bit version of UTMR module. This register can only be addressed when RDSEL = 1.

Note:

Writing to this register will change the raw counter value directly. The user must handle the operation correctly to avoid data corruption. There is no safeguard for atomic access. Reading or writing a running counter is not recommended. This register must only be accessed while clocking is disabled.
The individual bytes in this multibyte register can be accessed with the following register names:
- TUxyTMRH: Accesses the high byte TUxyTMR[15:8]
- TUxyTMRL: Accesses the low byte TUxyTMR[7:0]

Name:	TU16yTMR
Address:	0x130,0x13E


Bit	15	14	13	12	11	10	9	8
	TMR[15:8]
Access	R/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset	0	0	0	0	0	0	0	0


Bit	7	6	5	4	3	2	1	0
	TMR[7:0]
Access	R/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset	0	0	0	0	0	0	0	0

Bits 15:0 – TMR[15:0] Timer value

Reset States:

POR/BOR = 0000000000000000

All Other Resets = uuuuuuuuuuuuuuuu

Name	Description
RDSEL = `1`	The raw counter register is read or written; must only be accessed while clocking is disabled, i.e., when ON = `0`
RDSEL = `0`	Reserved. Do not use.

Writing to this register will change the raw counter value directly. The user must handle the operation correctly to avoid data corruption. There is no safeguard for atomic access. Reading or writing a running counter is not recommended. This register must only be accessed while clocking is disabled. The individual bytes in this multibyte register can be accessed with the following register names: TUxyTMRH: Accesses the high byte TUxyTMR[15:8] TUxyTMRL: Accesses the low byte TUxyTMR[7:0]