1.1.5 Exiting Hold State using PRESET Values
(Ask a Question)PRESET EN is set to 1'b1 while the PLL is in a hold state, and once HOLD = 1'b0, the PLL will resume locking from the INT PRESET and FRAC PRESET values.
PRESET EN is set to 1'b1 while the PLL is in a hold state, and once HOLD = 1'b0, the PLL will resume locking from the INT PRESET and FRAC PRESET values.
The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.