10 Document Revision History

RevisionDateSectionDescription
B12/2021DocumentMinor edits
FeaturesUpdated supply voltage values
Minor edits and updates in the chapters
Added sections
Power Supply SettingsUpdated section
Package InformationUpdated Section
A05/2021Document
  • Updated from Atmel to Microchip template
  • Assigned a new Microchip document number; previous version is Atmel 9347 revision BX
  • ISBN number added
  • Updated with new terminologies to replace Master/Slave wordings. For more details, see the note below.
Note: Microchip is aware that some terminologies used in the technical documents and existing software codes of this product are outdated and unsuitable. This document may use these new terminologies, which may or may not reflect on the source codes, software GUIs, and the documents referenced within this document. The following table shows the relevant terminology changes made in this document.
Table 10-1. Terminology Related Changes
Old TerminologyNew TerminologyDescription
MasterHostThis entire document is updated with the new terminologies.
SlaveClient

Previous Revision History from Atmel Document

Revision No.Description

9347BXINDCO-08/15

• Section 2.2.2 “Firmware Initialization” on pages 17 to 23 updated

• Section 2.4 “Operating Modes Overview” on pages 24 to 25 updated

• Section2.8.5 “Transitions to RXMode” on pages 53 updated

• Section2.8.8.10 “External LNA Control” on page 77 updated

• Section 3.11.3.1 “Power ON and Brown-Out Reset (POR) on pages 401 to 402 updated

• Section 4.1.3.2 “RFIN Matching” on pages 420 to 421 updated

• Section 4.1.4 “External LNA Support” on page 422 updated

• Section 5.4 “Supply Voltages and Current Consumption” on page 436 updated

• Section6.8 “I/O Characteristics for Ports PB0 to PB7 and PC0 to PC5” on pages 448 to 449 updated

• Section 7.4 “SRAM Map” on page 475 updated

• Section 7.5 “EEPROM Map” on page 485 updated

• Section 7.6.17 “Get Version ROM” on page 531 added

• Section8 “Ordering Information” on page 541 updated