Introduction
1 Installing the Library
To use the libraries, install the MPLAB Code Configurator plug-in tool in the MPLAB X IDE. This section describes the installation of MCC and the Diagnostic Libraries.
2 Updating the Library
An update may be required if the library was previously installed and a new version is available. This section describes how to update the library using CMT in MCC.
3 Adding Diagnostic Tests
This section describes adding diagnostic tests using MCC Melody and the Diagnostic Libraries in MPLAB X projects.
4 Running the Examples
Examples are available for each diagnostic test. Users can generate these examples if the options are enabled in the user interface. For instance, to add the AVR SW_CPU_REGISTER_TEST_01 example:
5 Revision History
Microchip Information

5 Revision History


Doc. Rev.	Date	Comments
C	01/2024	Updated images
B	12/2023	Updated steps to access API refs
A	09/2023	Initial document release

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.