11.5.2 OSCCON1

Oscillator Control Register 1

Note:

The default value is determined by the RSTOSC Configuration bits. See the Reset Oscillator (RSTOSC) selection table for RSTOSC selections.
If NOSC is written with a reserved value, the operation is ignored and neither NOSC nor NDIV is written.
When CSWEN = 0, these bits are read-only and cannot be changed from the RSTOSC value.

Name:	OSCCON1
Offset:	0x028D


Bit	7	6	5	4	3	2	1	0
		NOSC[2:0]			NDIV[3:0]
Access		R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset		f	f	f	q	q	q	q

Bits 6:4 – NOSC[2:0] New Oscillator Source Request^(1,2,3)

Requests a new oscillator source per the NOSC/COSC Clock Source Selection Table

Bits 3:0 – NDIV[3:0] New Divider Selection Request

Requests the new post-scaler division ratio per the NDIV/CDIV Clock Divider Selection Table

The default value is determined by the RSTOSC Configuration bits. See the Reset Oscillator (RSTOSC) selection table for RSTOSC selections. If NOSC is written with a reserved value, the operation is ignored and neither NOSC nor NDIV is written. When CSWEN = 0, these bits are read-only and cannot be changed from the RSTOSC value.

11.5.2 OSCCON1

Bits 6:4 – NOSC[2:0] New Oscillator Source Request(1,2,3)

Bits 3:0 – NDIV[3:0] New Divider Selection Request

Bits 6:4 – NOSC[2:0] New Oscillator Source Request^(1,2,3)