32.6.3.3 Totem-Pole Output

When configured for totem-pole (push-pull) output, the pin is driven low or high according to the corresponding bit setting in the OUT register. In this configuration there is no current limitation for sink or source other than what the pin is capable of. If the pin is configured for input, the pin will float if no external pull is connected.

Note: Enabling the output driver will automatically disable pull.

Figure 32-6. I/O Configuration - Totem-Pole Output with Disabled Input

Figure 32-7. I/O Configuration - Totem-Pole Output with Enabled Input

Figure 32-8. I/O Configuration - Output with Pull

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.