Application Code End

The default value given in this fuse description is the factory-programmed value and should not be mistaken for the Reset value.

Name:
APPEND
Offset:
0x07
Reset:
0x00
Access:
-
 Bit7 6 5 4 3 2 1 0 APPEND[7:0] AccessR R R R R R R R Reset0 0 0 0 0 0 0 0

## Bits 7:0 – APPEND[7:0]: Application Code Section End

Application Code Section End

This bit field sets the end of the application code section in blocks of 256 bytes. The end of the application code section will be set as (BOOT size) + (application code size). The remaining Flash will be application data. A value of 0x00 defines the Flash from BOOTEND*256 to the end of Flash as the application code. When both FUSE.APPEND and FUSE.BOOTEND are 0x00, the entire Flash is the BOOT section.