9.15.1.9 +SOCKRDBUF

This command is used to read data from a socket buffer

Security – Default Security for the command is: GGGG

Table 9-155. Command Syntax
Command	Description	Security
`AT+SOCKRDBUF=<SOCK_ID>,<OUTPUT_MODE>,<LENGTH>`	Socket read	`GGGG`

Table 9-156. Command Parameter Syntax
Parameter Name	Type	Description
`<SOCK_ID>`	Integer	The socket ID. Valid range is 1-65535
`<OUTPUT_MODE>`	Integer	The format the DTE wishes to receive the data `1` – ASCII or hex string `2` – Binary
`<LENGTH>`	Integer	The number of bytes the DTE wishes to read