Jump to main content
Testing WILCS02/WINCS02 with MCHPRT3 Tool
Introduction
1 Quick References
1.1 Reference Documentation
1.2 Hardware Prerequisites
1.3 Software Prerequisites
1.4 Acronyms and Abbreviations
2 MCHPRT3 Tool and WILCS02_WINCS02 Package Components
3 Installing MCHPRT3 Tool
4 Testing and Calibrating WILCS02_WINCS02 with Wi-Fi® Tester Using MCHPRT3 Tool
4.1 Getting Started with MCHPRT3 Tool GUI for the WILCS02_WINCS02
4.2 Connect WILCS02_WINCS02 Device
4.3 RF TX Modulation Test Demonstration
4.4 RF TX Tone Test Demonstration
4.5 RF RX Test Demonstration
4.6 Calibration Flow Demonstration
4.7 MAC Address Programming
4.8 Gain Tables Demonstration
4.9 Post Cal
4.10 Go Mission Mode
4.11 Chip Secure
5 WILCS02_WINCS02 Dynamic Link Library (DLL) Gain Table Information
5.1 Gain Table Example
6 WILCS02_WINCS02 Command Line Interface (CLI) Information
6.1 WILCS02_WINCS02 CLI Example
7 WILCS02_WINCS02 Python 3 Information
7.1 Python 3.11.1 Environment
7.2 Steps to Run the Python 3.11 Environment
8 Document Revision History
Microchip Information
Trademarks
Legal Notice
Microchip Devices Code Protection Feature