20.4 SmartPower Tcl Commands
SmartPower supports the following Tcl scripting commands:
- report (Activity and Hazards Power Report)
- report (Cycle Accurate Power Report)
- Report (Data History)
- report (Power)
- Report (Power Scenario)
- smartpower_add_new_custom_mode
- smartpower_add_new_scenario
- smartpower_add_pin_in_domain
- smartpower_change_clock_statistics
- smartpower_change_setofpin_statistics
- smartpower_commit
- smartpower_create_domain
- smartpower_edit_custom_mode
- smartpower_edit_scenario
- smartpower_initialize_clock_with_constraints
- smartpower_init_do
- smartpower_init_set_clocks_options
- smartpower_init_set_combinational_options
- smartpower_init_set_enables_options
- smartpower_init_set_othersets_options
- smartpower_init_set_primaryinputs_options
- smartpower_init_set_registers_options
- smartpower_init_set_set_reset_options
- smartpower_init_setofpins_values
- smartpower_remove_all_annotations
- smartpower_remove_custom_mode
- smartpower_remove_domain
- smartpower_remove_file
- smartpower_remove_pin_enable_rate
- smartpower_remove_pin_frequency
- smartpower_remove_pin_of_domain
- smartpower_remove_pin_probability
- smartpower_remove_scenario
- smartpower_remove_vcd
- smartpower_restore
- smartpower_set_battery_capacity
- smartpower_set_cooling
- smartpower_set_mode_for_analysis
- smartpower_set_operating_condition
- smartpower_set_pin_probability
- smartpower_set_pin_frequency
- smartpower_set_preferences
- smartpower_set_scenario_for_analysis
- smartpower_set_temperature_opcond
- smartpower_set_thermalmode
- smartpower_set_voltage_opcond
- smartpower_temperature_opcond_set_design_wide
- smartpower_temperature_opcond_set_mode_specific
- smartpower_voltage_opcond_set_design_wide
- smartpower_voltage_opcond_set_mode_specific