Jump to main content
39.8.17 Interrupt Enable The settings in the
Interrupt Enable register determine which status changes in the Interrupt Register will be
signalled on an interrupt line. Name: IE Offset: 0x54 Reset: 0x00000000 Property: -
Bit 31 30 29 28 27 26 25 24 ARAE PEDE PEAE WDIE BOE EWE Access R/W R/W R/W R/W R/W R/W Reset 0 0 0 0 0 0
Bit 23 22 21 20 19 18 17 16 EPE ELOE BEUE BECE DRXE TOOE MRAFE TSWE Access R/W R/W R/W R/W R/W R/W R/W R/W Reset 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 TEFLE TEFFE TEFWE TEFNE TFEE TCFE TCE HPME Access R/W R/W R/W R/W R/W R/W R/W R/W Reset 0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0 RF1LE RF1FE RF1WE RF1NE RF0LE RF0FE RF0WE RF0NE Access R/W R/W R/W R/W R/W R/W R/W R/W Reset 0 0 0 0 0 0 0 0
Bit 29 – ARAE Access to Reserved Address Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 28 – PEDE Protocol Error in Data Phase Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 27 – PEAE Protocol Error in Arbitration Phase Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 26 – WDIE Watchdog Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 25 – BOE Bus_Off Status Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 24 – EWE Error Warning Status Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 23 – EPE Error Passive Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 22 – ELOE Error Logging Overflow Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 21 – BEUE Bit Error Uncorrected Interrupt Enable.
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 20 – BECE Bit Error Corrected Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 19 – DRXE Message stored to Dedicated Rx Buffer Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 18 – TOOE Timeout Occurred Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 17 – MRAFE Message RAM Access Failure Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 16 – TSWE Timestamp Wraparound Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 15 – TEFLE Tx Event FIFO Event Lost Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 14 – TEFFE Tx Event FIFO Full Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 13 – TEFWE Tx Event FIFO Watermark Reached Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 12 – TEFNE Tx Event FIFO New Entry Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 11 – TFEE Tx FIFO Empty Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 10 – TCFE Transmission Cancellation Finished Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 9 – TCE Transmission Completed Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 8 – HPME High Priority Message Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 7 – RF1LE Rx FIFO 1 Message Lost Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 6 – RF1FE Rx FIFO 1 Full Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 5 – RF1WE Rx FIFO 1 Watermark Reached Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 4 – RF1NE Rx FIFO 1 New Message Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 3 – RF0LE Rx FIFO 0 Message Lost Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 2 – RF0FE Rx FIFO 0 Full Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 1 – RF0WE Rx FIFO 0 Watermark Reached Interrupt
Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
Bit 0 – RF0NE Rx FIFO 0 New Message Interrupt Enable
Value Description
0
Interrupt disabled.
1
Interrupt enabled.
The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.
