Jump to main content
RNBD451 Bluetooth® Low Energy Module User’s Guide
Search
Product Pages
PIC32CX-BZ2
RNBD451PE
Home
5
Command Reference
5.2
System Configuration Commands
Introduction
Features
1
Quick References
2
Command Mode and Data Mode
3
Accessing
RNBD451
Over UART
4
Pin Definition
5
Command Reference
5.1
Command Details
5.2
System Configuration Commands
5.2.1
Default Service Configure (SS,<hex8>)
5.2.2
Get Connection Status (GK)
5.2.3
Echo (+[,<text>])
5.2.4
Enter Command Mode ($$$)
5.2.5
Exit Command Mode (---)
5.2.6
Set Enter Command Character (S$,<char>)
5.2.7
Set Status Delimiter (S%,<pre>,<post>)
5.2.8
Get Configuration (G<char>)
5.2.9
Query Firmware Version (V)
5.2.10
Get Local Information (D)
5.2.11
Remote Command Mode Control (!,<0,1>[,<hex16>])
5.2.12
Factory Reset (SF<1,2>)
5.2.13
Shutdown (O,0)
5.2.14
Reboot (R,1)
5.2.15
Set Application Options (SR,<hex16>)
5.2.16
Set Debug Log (SLOG,<hex8>)
5.2.17
Get Debug Log Setting (GLOG)
5.2.18
Get Silicon Version (VOS)
5.2.19
Set Vendor Data (SVD,<text>)
5.2.20
Get Vendor Data (GVD)
5.2.21
Set SW PTA (SPTA,<0,1>)
5.2.22
Get SW PTA Setting (GPTA)
5.2.23
Set HCI Determination (SH,<0,1>)
5.3
Gap Commands
5.4
Bluetooth Low Energy GATT/Profile Commands
5.5
Peripheral Commands
5.6
Device Test Mode (DTM)
5.7
DFU Commands
5.8
Deprecated Commands
5.9
Command Response and Status Event
6
HCI Mode
7
Application Demo Scenarios
8
RNBD451
Device Firmware Update Procedure
9
Appendix A. Bluetooth Low Energy Fundamentals
10
Appendix B. Transparent UART Service UUIDs
11
Appendix C: Command Summary Quick Reference
12
Document Revision History
Microchip Information
5.2 System Configuration Commands
