14.3.2.2 Use Model 2: Configuring I²C as a Slave

The I²C peripheral can be configured to Slave mode. In Slave mode, the I2C_0 responds to the commands received by the I²C master device.

See the 14.3.1 Design Flow to configure I2C_0 in the application.

The online versions of the documents are provided as a courtesy. Verify all content and data in the device’s PDF documentation found on the device product page.

14.3.2.2 Use Model 2: Configuring I2C as a Slave

14.3.2.2 Use Model 2: Configuring I²C as a Slave