37.4.40 I3CxMRT

Note:

This register follows the definition of GETMXDS CCC Maximum Read Turnaround Time Byte format as per the MIPI I3C Basic 1.0 Specification. The Controller can read this byte during GETMXDS CCC.
To guarantee expected behavior, this register should only be written when the module is disabled (EN = 0).

Name:	I3CxMRT
Address:	0x0AE, 0x0E1

Maximum Read Turnaround Time


Bit	23	22	21	20	19	18	17	16
	MRT[23:0]
Access	R/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset	0	0	0	0	0	0	0	0


Bit	15	14	13	12	11	10	9	8
	MRT[23:0]
Access	R/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset	0	0	0	0	0	0	0	0


Bit	7	6	5	4	3	2	1	0
	MRT[23:0]
Access	R/W	R/W	R/W	R/W	R/W	R/W	R/W	R/W
Reset	0	0	0	0	0	0	0	0

Bits 23:0 – MRT[23:0] Maximum Read Turnaround Time

Maximum Read Turnaround Time in µs. The 24-bit register can encode turnaround times from zero to 16 seconds.

This register follows the definition of GETMXDS CCC Maximum Read Turnaround Time Byte format as per the MIPI I3C Basic 1.0 Specification. The Controller can read this byte during GETMXDS CCC. To guarantee expected behavior, this register should only be written when the module is disabled (EN Target Enable = 0).