21.13.1.78 write_usram

Description

This tcl command writes a 12-bit word into the specified uSRAM location.

write_usram [-deviceName "device name"] \
            [-name "USRAM block name"] \
            [-logicalBlockName "USRAM user defined block name"] \
            [-port "USRAM port name"] \
            [-offset "integer value"] \
            [-logicalValue "USRAM block word value"] \
            [-value "integer value"]

Physical block
write_usram –name block_name \
            –offset offset_value \
            –value integer_value

Logical block
write_usram -logicalBlockName block_name \
            -port port_name \
            -offset offset_value \
            -logicalValue hexadecimal_value

Arguments


Parameter	Type	Description
deviceName	string	Optional user-defined device name. The device name is not required if there is only one device in the current configuration, or a device has already been selected using the set_debug_device command.
name	string	Specifies the name for the target block.
logicalBlockName	string	Specifies the name of the user defined memory block.
port	string	Specifies the port of the memory block selected. Can be either Port A or Port B.
offset	integer	Offset (address) of the target word within the memory block.
logicalValue	integer	Specifies the hexadecimal value to be written to the memory block. Size of the value is equal to the width of the output port selected.
value	integer	12- bit value to be written.


Return Type	Description
None	None

Error Codes


Error Code	Description
None	Parameter 'logicalValue' has illegal value.
None	offset: Invalid argument value: 'offset_value' (expecting integer value).
None	Parameter 'offset' has illegal value.
None	Active probe value must be specified.
None	Port_name is an invalid Port name.
None	Parameter 'port' has illegal value.
None	LSRAM port name must be specified.
None	LSRAM block word cannot be written. Use phyical block word to write.
None	Missing argument. Must specify '-name' or '-logicalBlockName'.
None	Parameter 'value' has illegal value.
None	Parameter 'name' has illegal value.

Supported Families


PolarFire
PolarFire SoC
SmartFusion 2
IGLOO 2
RTG4

Example

Writes a value of 0x291 to the device PolarFire in the Fabric_Logic_0/U3/F_0_F0_U1/ramtmp_ramtmp_0_0/INST_RAM64x12_IP with an offset of 0.

write_lsram \
-name {Fabric_Logic_0/U3/F_0_F0_U1/ramtmp_ramtmp_0_0/INST_RAM64x12_IP} \
-offset 0 \
-value 291

write_usram -logicalBlockName {Fabric_Logic_0/U3/F_0_F0_U1} -port {Port A} -offset 1 -logicalValue {00FFF}

v2024.1