21.13.1.52 remove_probe_insertion

Description

This Tcl command removes probe point from probe insertion list. The command will fail if the net name or driver are not specified or are incorrect.

Note:

Deleting probes from the probes list without clicking 'Run' does not automatically remove the probes from the design.
Probe Insertion feature disabled in the SmartDebug Demo and Standalone modes.

remove_probe_insertion_point -net {net_name} -driver {driver_name}


Parameter	Type	Description
net	string	Specify name of the existing net which is added in probe insertion list. This parameter is mandatory.
driver	string	Specify driver name. This parameter is mandatory.


Return Type	Description
None	Probe insertion operations are not supported in Standalone SmartDebug.


Error Code	Description
None	No probe point with net: "net_name" and driver: "driver_name" is added to be removed.
None	Parameter 'param_name' is not defined. Valid command formatting is 'remove_probe_insertion_point [-net "net_name"] [-driver "driver_name"] '.

The following example removes probe from the probe insertion list:

remove_probe_insertion_point -net {count_c[0]} -driver {Counter_out[0]:Q}