Jump to main content

MPLAB® Harmony 3 Motor Control

Home
3 Harmony QSpin API Reference
3.3 Field Oriented Control API Reference
3.3.18 Flux Control API Reference
This section describes the API references for the flux control module.

1 Introduction
2 Harmony QSpin - PMSM FOC
3 Harmony QSpin API Reference
- 3.1 Application API Reference
- 3.2 Current Measurement API Reference
- 3.3 Field Oriented Control API Reference
  - 3.3.1 mcFocI_FieldOrientedControlInit
  - 3.3.2 mcFocI_FieldOrientedControlEnable
  - 3.3.3 mcFocI_FieldOrientedControlSlow
  - 3.3.4 mcFocI_FieldOrientedControlFast
  - 3.3.5 mcFocI_FieldOrientedControlDisable
  - 3.3.6 mcFocI_FieldOrientedControlReset
  - 3.3.7 mcFocI_MotorDirectionChange
  - 3.3.8 mcFoc_ClarkeTransformation
  - 3.3.9 mcFoc_ParkTransformation
  - 3.3.10 mcFoc_InverseParkTransformation
  - 3.3.11 tmcFocI_ModuleData_s Struct
  - 3.3.12 tmcFoc_State_s Struct
  - 3.3.13 tmcFoc_Parameters_s Struct
  - 3.3.14 tmcFoc_Output_s Struct
  - 3.3.15 tmcFoc_Input_s Struct
  - 3.3.16 tmcFoc_FocState_e Enum
  - 3.3.17 ROTOR_ANGLE_RAMP_RATE Macro
  - 3.3.18 Flux Control API Reference
    This section describes the API references for the flux control module.
  - 3.3.19 Flying Start API Reference
    This section describes the API references for the flying start module.
  - 3.3.20 Motor Parameters API Reference
    This section describes the API references for the motor parameter configuration module.
  - 3.3.21 Open Loop Startup API Reference
    This section describes the API references for the open loop startup module.
  - 3.3.22 PWM API Reference
    This section describes the API references for the PWM modulator.
  - 3.3.23 Reference Control API Reference
    This section describes the API references for the reference control module.
  - 3.3.24 Speed Control API Reference
    This section describes the API references for the speed control module.
  - 3.3.25 Torque Control API Reference
    This section describes the API references for the torque control module.
  - 3.3.26 Position Control API Reference
    This section describes the API references for the position control module.
  - 3.3.27 OPEN_TO_CLOSE_ANGLE_STEP_SIZE Macro
  - 3.3.28 DC_BUS_VOLTAGE_LIMIT Macro
- 3.4 Rotor Position Calculation API Reference
- 3.5 Rotor Position Estimation API Reference
- 3.6 IPD API Reference
- 3.7 Voltage Measurement API Reference
- 3.8 Hardware Abstraction API Reference
- 3.9 Utilities API Reference
- 3.10 Key Manager API Reference
- 3.11 Typedefs And Constants API Reference
4 Motor Control Development Kits and Boards
5 Motor Control Example Projects
6 Microchip MPLAB® Harmony 3 Release Notes
7 License
Microchip Information

3.3.18 Flux Control API Reference

This section describes the API references for the flux control module.

Microchip Facebook

Microchip LinkedIn

Microchip Twitter

Microchip YouTube

Microchip Instagram

Microchip Weibo

Contact |

Legal |

Privacy Policy |

Cookies |

Careers

Stay on the leading edge with our blog

© Copyright 1998-2022 Microchip Technology Inc. All rights reserved.