5.34.77 Arguments

-schematic {file}

Specifies the schematics you wish to import into your IDE project. Type parameter must be repeated for each file.

-symbol {file}

Specifies the symbols you wish to import into your IDE project. Type parameter must be repeated for each file.

-smartgen_core {file}

Specifies the cores you wish to import into your project. Type parameter must be repeated for each file.

-ccp {file}

Specifies the ARM or Cortex-M1 cores you wish to import into your project. Type parameter must be repeated for each file.

-stimulus {file}

Specifies HDL stimulus files you wish to import into your project. Type parameter must be repeated for each file.

-hdl_source {file}

Specifies the HDL source files you wish to import into your project. Type parameter must be repeated for each file.

-edif {file}

Specifies the EDIF files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_sdc {file}

Specifies the SDC constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_pin {file}

Specifies the PIN constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_dcf {file}

Specifies the DCF constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_pdc {file}

Specifies the PDC constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_gcf {file}

Specifies the GCF constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_vcd {file}

Specifies the VCD constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_saif {file}

Specifies the SAIF constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_crt {file}

Specifies the CRT constraint files you wish to import into your project. Type parameter must be repeated for each file.

-simulation {file}

Specifies the simulation files you wish to import into your Libero IDE project. Type parameter must be repeated for each file.

-profiles {file}

Specifies the profile files you wish to import into your Libero IDE project. Type parameter must be repeated for each file.

-cxf {file}

Specifies the CXF file (such as SmartDesign components) you wish to import into your Libero IDE project. Type parameter must be repeated for each file.

-templates {file}

Specifies the template file you wish to import into your IDE project.

-ccz {file}

Specifies the IP core file you wish to import into your project.

-wf_stimulus {file}

Specifies the WaveFormer Pro stimulus file you wish to import into your project.

-modelsim_ini {file}

Specifies the ModelSIM INI file that you wish to import into your project.