43.6 Peripheral Active Current

Table 43-9. Peripheral Active Current DC Electrical Specifications
DC CHARACTERISTICS Standard Operating Conditions: VDDIO = VDDANA 2.7V to 5.5V (unless otherwise stated)

Operating temperature: -40°C ≤ TA ≤ +85°C for Industrial
Param. No. Symbol Characteristics Conditions
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 1.5 µA
PAI_10 IRC32K RC32K current VDDANA = VDDIO = 5.0V
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 2 µA
PAI_20 IXOSC32K XOSC32K current VDDANA = VDDIO = 5.0V
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 75 µA
PAI_30 IBOD50 BOD50 Active current Continuous mode, VDDANA = VDDIO = 5.0V
PAI_33 IEVSYS EVSYS Active current One channel operating, Synchronous mode
PAI_36 ICCL CCL Active current All LUT Active, Filter Enabled
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 100 µA
PAI_39 IWDT WDT Active current -
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 200 µA
PAI_50 IEIC EIC/NMI Active current One EIC line operating, Filter Enabled
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 250 µA
PAI_60 IXOSC_2MHZ_AMPGC_ON XOSC current (1 of 10) F = 2 MHz - CL= 20 pF XOSC.GAIN = 0, AMPGC = ON, VDDANA = VDDIO = 5.0V
PAI_62 IXOSC_2MHZ_AMPGC_OFF XOSC current (2 of 10) F = 2 MHz - CL= 20 pF XOSC.GAIN = 0, AMPGC = OFF, VDDANA = VDDIO = 5.0V
PAI_65 ITC4 TC Active current (1 of 2) Normal Frequency mode, Counter in 16bits mode
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 300 µA
PAI_70 IAC AC Active current COMP0 and COMP1 operating in low speed, Vscaler0 = Vscaler1 = VDDANA
PAI_73 IXOSC_4MHZ_AMPGC_ON XOSC current (3 of 10) F = 4 MHz - CL= 20 pF XOSC.GAIN = 1, AMPGC = ON, VDDANA = VDDIO = 5.0V
PAI_76 IXOSC_4MHZ_AMPGC_OFF XOSC current (4 of 10) F = 4 MHz - CL= 20 pF XOSC.GAIN = 1, AMPGC = OFF, VDDANA = VDDIO = 5.0V
PAI_79 IPDEC PDEC Active current Counter Mode
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 350 µA
PAI_90 ISERCOMx SERCOM Active current USART Mode, no communication
PAI_93 IXOSC_8MHZ_AMPGC_ON XOSC current (5 of 10) F = 4 MHz - CL= 20 pF XOSC.GAIN = 1, AMPGC = ON, VDDANA = VDDIO = 5.0V
PAI_96 ITCC2 TCC Active Current (1 of 2) Normal Frequency mode
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 400 µA
PAI_100 ITC0/1/2/3 TC Active current (2 of 2) Normal Frequency mode, Counter in 16bits mode
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 450 µA
PAI_110 IXOSC_8MHZ_AMPGC_OFF XOSC current (6 of 10) F = 8 MHz - CL= 20 pF XOSC.GAIN = 2, AMPGC = OFF, VDDANA = VDDIO = 5.0V
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 550 µA
PAI_53 IRC48M RC48M current VDDANA = VDDIO = 5.0V
PAI_120 IDAC DAC Active current VREF = VDDANA, DAC DATA = 0x3FF (2)
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 650 µA
PAI_130 ITSENS TSENS Active current Free-Running Mode
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 700 µA
PAI_140 IDPLL48M DPLL Current (1 of 2) Fout = 48 MHz, VDDANA = VDDIO = 5.0V
PAI_143 IXOSC_16MHZ_AMPGC_ON XOSC current (7 of 10) F = 16 MHz - CL= 20 pF XOSC.GAIN = 3, AMPGC = ON, VDDANA = VDDIO = 5.0V
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 750 µA
PAI_150 IFREQM FREQM Active current Reference running at 48MHz and Measure clock running at 96 MHz (3)
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 900 µA
PAI_160 IXOSC_16MHZ_AMPGC_OFF XOSC current (8 of 10) F = 16 MHz - CL= 20 pF XOSC.GAIN = 3, AMPGC = OFF, VDDANA = VDDIO = 5.0V
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 1 mA
PAI_170 ISDADC SDADC Active current Free-Running Mode
PAI_173 IDPLL96M DPLL Current (2 of 2) Fout = 96 MHz, VDDANA = VDDIO = 5.0V
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 1.5 mA
PAI_180 IXOSC_32MHZ_AMPGC_ON XOSC current (9 of 10) F = 32 MHz - CL=12 pF XOSC.GAIN = 4, AMPGC = ON, VDDANA = VDDIO = 5.0V
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 2 mA
PAI_190 ITCC0/1 TCC Active Current (2 of 2) Normal Frequency mode (3)
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 2.5 mA
PAI_200 IADC ADC Active current Free-Running, 1 Msps, VDDANA = VREF = 5,5V (4)
PAI_203 IDMA DMA Active current RAM-to-RAM transfer, one channel operating
MODULES/PERIPHERALS ACTIVE CURRENTS ≤ 3 mA
PAI_210 IXOSC_32MHZ_AMPGC_OFF XOSC current (10 of 10) F = 32 MHz - CL= 12 pF XOSC.GAIN = 4, AMPGC = OFF, VDDANA = VDDIO = 5.0V
Note:
  1. Conditions:
    • Only mentioned peripheral module is operating (that is, rest of the peripherals are inactive)
    • MCLK all APB clock masked except MCLK and NVMCTRL and selected peripheral
    • MCLK.AHBMASK = 0x00005FF
    • All clock generation sources disabled unless otherwise specified. (that is, XOSC32 = OFF)
    • All clock sources disabled except XOSC32K running with external 32kHz crystal and FDPLL96M using XOSC32K as reference and running at 96MHz divided by 2 on GCLK0
    • GCLK clock generators 1 to 8 stopped (GENCTRL[8:1].GENEN = 0)
    • CPU and AHB clocks undivided
    • All I/O pins configured as input pins pulled down or tied to GND
    • WDT, RTCC, CFD Clock Fail Detect disabled
    • RESET = VDDIO
    • CPU is running on Flash with 2 Wait States
    • NVMCTRL cache enabled
    • BODVDD disabled
    • Measure is differential between active and inactive module in those conditions
  2. Conditions:
    • Same Conditions as Note 1
    • GCLK1 running on FDPLL96M at 96 MHz divided by 96
    • Measure is differential between active and inactive module in those conditions
  3. Conditions:
    • Same Conditions as Note 1
    • GCLK1 running on FDPLL96M at 96 MHz not divided
    • Measure is differential between active and inactive module in those conditions
  4. Conditions:
    • Same Conditions as Note 1
    • GCLK1 running on FDPLL96M at 96 MHz divided by 6
    • Measure is differential between active and inactive module in those conditions