21.3.93 smartdesign

Description

This Tcl command changes severity of Smart Design Data/ID Width mismatch, Memory Map DRC from error to warning vice versa.

smartdesign -memory_map_drc_change_error_to_warning {true|false} \
            -bus_interface_data_width_drc_change_error_to_warning {true|false} \
            -bus_interface_id_width_drc_change_error_to_warning {true|false}

Arguments


Parameter	Type	Description
memory_map_drc_change_error_to_warning	Boolean	Specify true or 1 to change memory map error DRC to warning.
bus_interface_data_width_drc_change_error_to_warning	Boolean	Specify true or 1 to change bus interface data width mismatch error DRC to warning.
bus_interface_id_width_drc_change_error_to_warning	Boolean	Specify true or 1 to change bus interface ID width mismatch error DRC to warning.


Return Type	Description
None	None

Error Codes


Error Code	Description
None	Parameter 'param_name' is not defined. Valid command formatting is ‘smartdesign [-memory_map_drc_change_error_to_warning true \| false] [-bus_interface_data_width_drc_change_error_to_warning true \| false] [-bus_interface_id_width_drc_change_error_to_warning true \| false]

Supported Families


Supported Families
PolarFire®
PolarFire SoC
RTG4™
SmartFusion® 2
IGLOO® 2

Example

The following example change severity of SmartDesign Data, ID Width mismatch, Memory Map Error to Warning DRC:

smartdesign -memory_map_drc_change_error_to_warning true \
            -bus_interface_data_width_drc_change_error_to_warning true \
            -bus_interface_id_width_drc_change_error_to_warning true

v2024.1