13.33.20 import_files (Libero IDE)

The import_files command imports all the files you need in your Libero IDE project.

import_files
-schematic {file}
-symbol {file}
-smartgen_core {file}
-ccp {file}
-stimulus {file}
-hdl_source {file}
-edif {file}
-sdc {file}
-pin {file}
-dcf {file}
-pdc {file}
-gcf {file}
-vcd {file}
-saif {file}
-crt {file}
-simulation {file}
-profiles {file}
-cxf {file}
-templates {file}
-ccz {file}
-wf_stimulus {file}
-modelsim_ini {file}
-schematic {file}

Arguments

Specifies the schematics you wish to import into your IDE project. Type parameter must be repeated for each file.

-symbol {file}

Specifies the symbols you wish to import into your IDE project. Type parameter must be repeated for each file.

-smartgen_core {file}

Specifies the cores you wish to import into your project. Type parameter must be repeated for each file.

-ccp {file}

Specifies the ARM or Cortex-M1 cores you wish to import into your project. Type parameter must be repeated for each file.

-stimulus {file}

Specifies HDL stimulus files you wish to import into your project. Type parameter must be repeated for each file.

-hdl_source {file}

Specifies the HDL source files you wish to import into your project. Type parameter must be repeated for each file.

-edif {file}

Specifies the EDIF files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_sdc {file}

Specifies the SDC constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_pin {file}

Specifies the PIN constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_dcf {file}

Specifies the DCF constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_pdc {file}

Specifies the PDC constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_gcf {file}

Specifies the GCF constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_vcd {file}

Specifies the VCD constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_saif {file}

Specifies the SAIF constraint files you wish to import into your project. Type parameter must be repeated for each file.

-constraint_crt {file}

Specifies the CRT constraint files you wish to import into your project. Type parameter must be repeated for each file.

-simulation {file}

Specifies the simulation files you wish to import into your Libero IDE project. Type parameter must be repeated for each file.

-profiles {file}

Specifies the profile files you wish to import into your Libero IDE project. Type parameter must be repeated for each file.

-cxf {file}

Specifies the CXF file (such as SmartDesign components) you wish to import into your Libero IDE project. Type parameter must be repeated for each file.

-templates {file}

Specifies the template file you wish to import into your IDE project.

-ccz {file}

Specifies the IP core file you wish to import into your project.

-wf_stimulus {file}

Specifies the WaveFormer Pro stimulus file you wish to import into your project.

-modelsim_ini {file}

Specifies the ModelSIM INI file that you wish to import into your project.